stainless steel heat exchanger tubing
"
الأنابيب المزدوجة من الفولاذ المقاوم للصدأ 2205 2507 الأنابيب الخالية من اللحام المسحوبة باردة
Seamless duplex stainless steel tube is manufactured without any weld seam, produced by extruding a solid billet of duplex stainless steel into a hollow tube through a piercing and rolling process. The absence of a weld seam provides superior strength, uniform wall thickness, and excellent performance under high pressure, high temperature, and corrosive conditions. Our seamless duplex tubes offer the unique combination of high strength (approximately twice that of austenitic
ضغط عالي SS محول الحرارة أنبوب بناء سلس سمك الجدار المخصص
High pressure heat exchanger tube is specifically designed to withstand extreme internal and external pressures while maintaining efficient heat transfer performance. Manufactured from high-strength stainless steel and nickel alloys, these tubes are essential for applications where both pressure resistance and thermal efficiency are critical. Available in seamless construction to eliminate weld line weaknesses.Product SpecificationsParameterDetailsApplicable StandardsASTM
UNS S30403 أنابيب بلا خيوط من الفولاذ المقاوم للصدأ TP304L قابلة لللحام دون معالجة حرارية ما بعد الحام
UNS S30403 seamless pipe is a low carbon version of the standard 304 austenitic stainless steel, designed for applications requiring enhanced resistance to intergranular corrosion after welding or elevated temperature exposure. The "UNS S30403" designation corresponds to the Unified Numbering System for metals, identifying a composition of 18-20% chromium and 8-12% nickel, with a maximum carbon content of 0.030%. The low carbon content is the defining characteristic of UNS
316 316L الصلب المقاوم للصدأ الأنابيب السلسة الصلب النيكلي الأوستنيتيكي الكروم الموليبدينوم
316/316L Seamless Pipe - ASTM A312 TP316L Marine-grade Stainless Steel Pipe 316/316L stainless steel seamless pipe is an austenitic chromium-nickel-molybdenum alloy pipe known for its superior corrosion resistance, especially against chlorides and acidic environments. 316L is the low-carbon version of 316, offering better weldability and resistance to intergranular corrosion after welding. Both grades are widely used in marine, chemical, and pharmaceutical applications. Key
أنابيب بلا خيوط من الفولاذ المقاوم للصدأ SS 310 عالية الحرارة للخدمة الحرارية القصوى
SS 310 pipe is an austenitic stainless steel grade specifically designed for high-temperature applications. With excellent oxidation resistance and good strength at elevated temperatures, this grade is the preferred choice for furnace parts, heat treatment equipment, and high-temperature industrial piping systems. The 310 grade contains high levels of chromium (24-26%) and nickel (19-22%), which provide exceptional resistance to scaling at temperatures up to 1100°C (2012°F)
أنابيب من الفولاذ المقاوم للصدأ ذات درجة حرارة عالية منخفضة الكربون لخدمة الحرارة المستمرة
310S pipe is a low-carbon version of the standard 310 stainless steel grade, specifically designed for continuous high-temperature service where prolonged exposure to elevated temperatures is required. The lower carbon content (0.08% maximum compared to 0.25% for standard 310) provides improved weldability and reduces the risk of carbide precipitation during welding or sustained high-temperature operation. Like its standard 310 counterpart, 310S contains high levels of
أنابيب بلا خيوط من الفولاذ المقاوم للصدأ منخفضة النيكل للبيئات الزهرية الهيكلية
Low-nickel stainless steel seamless tube is an economical alternative to traditional austenitic stainless steels such as 304 and 316. By reducing nickel content and increasing manganese and nitrogen, this grade achieves a balanced austenitic structure at a significantly lower material cost, making it an attractive choice for general industrial applications where extreme corrosion resistance is not the primary requirement. The most common low-nickel austenitic grade is 201
أنابيب بلا خيوط من الفولاذ المقاوم للصدأ الكرومية المانغنيزية الأوستنيتية UNS S20100
Chrome-manganese austenitic seamless pipe is an economical alternative to traditional chromium-nickel austenitic stainless steels such as 304 and 316. This grade achieves a stable austenitic structure by substituting a portion of expensive nickel with more cost-effective manganese and nitrogen, delivering comparable mechanical properties at a significantly lower material cost. The most common chrome-manganese austenitic grade is 201 stainless steel (UNS S20100), which
316 أنابيب مصفحة من الفولاذ المقاوم للصدأ مقاومة للتآكل الموليبدينوم تحتوي على أنابيب صناعية أوستينيتية
316 stainless steel welded pipe is manufactured by roll-forming stainless steel coil or plate into a tubular shape, followed by longitudinal welding. As a molybdenum-bearing austenitic stainless steel grade, it offers significantly improved resistance to chloride pitting and crevice corrosion compared to 304 stainless steel, while maintaining good high-temperature strength and workability. 316 ss welded pipe is produced from high-quality stainless steel coil using automated
