stainless steel heat exchanger tubing
"
Ống thép không gỉ kép 2205 2507 Ống liền mạch kéo nguội
Seamless duplex stainless steel tube is manufactured without any weld seam, produced by extruding a solid billet of duplex stainless steel into a hollow tube through a piercing and rolling process. The absence of a weld seam provides superior strength, uniform wall thickness, and excellent performance under high pressure, high temperature, and corrosive conditions. Our seamless duplex tubes offer the unique combination of high strength (approximately twice that of austenitic
Ống trao đổi nhiệt SS áp suất cao Xây dựng liền mạch Độ dày tường tùy chỉnh
High pressure heat exchanger tube is specifically designed to withstand extreme internal and external pressures while maintaining efficient heat transfer performance. Manufactured from high-strength stainless steel and nickel alloys, these tubes are essential for applications where both pressure resistance and thermal efficiency are critical. Available in seamless construction to eliminate weld line weaknesses.Product SpecificationsParameterDetailsApplicable StandardsASTM
UNS S30403 Bơm không thép không may TP304L có thể hàn mà không cần xử lý nhiệt sau hàn
UNS S30403 seamless pipe is a low carbon version of the standard 304 austenitic stainless steel, designed for applications requiring enhanced resistance to intergranular corrosion after welding or elevated temperature exposure. The "UNS S30403" designation corresponds to the Unified Numbering System for metals, identifying a composition of 18-20% chromium and 8-12% nickel, with a maximum carbon content of 0.030%. The low carbon content is the defining characteristic of UNS
316 316L thép không gỉ ống liền mạch Austenitic Nickel Chromium Molybdenum hợp kim thép
316/316L Seamless Pipe - ASTM A312 TP316L Marine-grade Stainless Steel Pipe 316/316L stainless steel seamless pipe is an austenitic chromium-nickel-molybdenum alloy pipe known for its superior corrosion resistance, especially against chlorides and acidic environments. 316L is the low-carbon version of 316, offering better weldability and resistance to intergranular corrosion after welding. Both grades are widely used in marine, chemical, and pharmaceutical applications. Key
Ống không thô SS 310 nhiệt độ cao cho dịch vụ nhiệt cực
SS 310 pipe is an austenitic stainless steel grade specifically designed for high-temperature applications. With excellent oxidation resistance and good strength at elevated temperatures, this grade is the preferred choice for furnace parts, heat treatment equipment, and high-temperature industrial piping systems. The 310 grade contains high levels of chromium (24-26%) and nickel (19-22%), which provide exceptional resistance to scaling at temperatures up to 1100°C (2012°F)
Rụng thép không gỉ 310S nhiệt độ cao và carbon thấp cho dịch vụ nhiệt liên tục
310S pipe is a low-carbon version of the standard 310 stainless steel grade, specifically designed for continuous high-temperature service where prolonged exposure to elevated temperatures is required. The lower carbon content (0.08% maximum compared to 0.25% for standard 310) provides improved weldability and reduces the risk of carbide precipitation during welding or sustained high-temperature operation. Like its standard 310 counterpart, 310S contains high levels of
Bụi không may bằng thép không gỉ có hàm lượng niken thấp cho môi trường ăn mòn trang trí cấu trúc
Low-nickel stainless steel seamless tube is an economical alternative to traditional austenitic stainless steels such as 304 and 316. By reducing nickel content and increasing manganese and nitrogen, this grade achieves a balanced austenitic structure at a significantly lower material cost, making it an attractive choice for general industrial applications where extreme corrosion resistance is not the primary requirement. The most common low-nickel austenitic grade is 201
Khẩu không may Chrome Manganese Austenitic Stainless Steel UNS S20100
Chrome-manganese austenitic seamless pipe is an economical alternative to traditional chromium-nickel austenitic stainless steels such as 304 and 316. This grade achieves a stable austenitic structure by substituting a portion of expensive nickel with more cost-effective manganese and nitrogen, delivering comparable mechanical properties at a significantly lower material cost. The most common chrome-manganese austenitic grade is 201 stainless steel (UNS S20100), which
Ống hàn bằng thép không gỉ 316 Molypden chống ăn mòn clorua có chứa ống công nghiệp Austenitic
316 stainless steel welded pipe is manufactured by roll-forming stainless steel coil or plate into a tubular shape, followed by longitudinal welding. As a molybdenum-bearing austenitic stainless steel grade, it offers significantly improved resistance to chloride pitting and crevice corrosion compared to 304 stainless steel, while maintaining good high-temperature strength and workability. 316 ss welded pipe is produced from high-quality stainless steel coil using automated
