stainless steel erw welded pipe
"
Schema 5S bis 40S für Edelstahl-Schweißrohre für Wasserprozessanwendungen
The Stainless Steel ERW (Electric Resistance Welded) Pipe is manufactured by cold-forming stainless steel coils into a cylindrical shape and welding the longitudinal seam using high-frequency electric resistance welding technology. This process produces a pipe with a narrow, uniform weld seam that is virtually indistinguishable from the base metal after proper heat treatment. ERW pipes offer an excellent balance of corrosion resistance, dimensional accuracy, and cost
ASTM A249 Schweißrohr aus austenitischer Edelstahl für den Wärmetauscher-Kesseldienst
ASTM A249 / A249M is a standard specification issued by ASTM International for welded austenitic stainless steel tubes used in boilers, superheaters, heat exchangers, condensers, and hydraulic systems. These tubes are manufactured using GTAW or ERW processes and are supplied in the solution annealed condition to ensure corrosion resistance and high-temperature strength. This product covers common grades such as TP304, TP304L, and TP304H, making it particularly suitable for
Geschweißtes rundes Rohr aus Edelstahl 304 ASTM A312 Spiegelveredelung für Handräder
Welded stainless steel round pipe is manufactured by forming a flat stainless steel strip or sheet into a cylindrical shape and welding the longitudinal seam. This process creates a cost-effective, dimensionally consistent pipe suitable for a wide range of industrial, commercial, and architectural applications. While seamless pipes are preferred for extremely high-pressure environments, welded pipes offer exceptional value for general-purpose applications where pressure
ASTM A790 geschweißtes Duplexrohr aus Edelstahl, Klasse 2205 2507 2304
Welded duplex stainless steel pipe is manufactured by forming a flat strip of duplex stainless steel into a cylindrical shape and welding the longitudinal seam. This process produces a pipe with excellent dimensional accuracy, consistent wall thickness, and a cost-effective solution for corrosive service applications. Our welded duplex pipes are produced using advanced welding techniques including ERW (Electric Resistance Welding), EFW (Electric Fusion Welding), and DSAW
ASTM A312 ERW Gerade geschweißtes Rohr für Korrosionsdienst bei hohen Temperaturen
ASTM A312 Rohr nahtlos und geschweißt TP304 TP304L
Schnittlose Rohre aus Edelstahl SS 310 mit hoher Temperatur
SS 310 pipe is an austenitic stainless steel grade specifically designed for high-temperature applications. With excellent oxidation resistance and good strength at elevated temperatures, this grade is the preferred choice for furnace parts, heat treatment equipment, and high-temperature industrial piping systems. The 310 grade contains high levels of chromium (24-26%) and nickel (19-22%), which provide exceptional resistance to scaling at temperatures up to 1100°C (2012°F)
Rohr aus Edelstahl 310S mit niedrigem Kohlenstoffgehalt und hoher Temperatur
310S pipe is a low-carbon version of the standard 310 stainless steel grade, specifically designed for continuous high-temperature service where prolonged exposure to elevated temperatures is required. The lower carbon content (0.08% maximum compared to 0.25% for standard 310) provides improved weldability and reduces the risk of carbide precipitation during welding or sustained high-temperature operation. Like its standard 310 counterpart, 310S contains high levels of
Längsgeschweißtes Rohr aus Edelstahl mit eingelegtem Abgang ASTM A312 A269 A249 A358
The Longitudinal Welded Stainless Steel Pipe is manufactured by roll forming high-quality stainless Steel coil into a cylindrical shape and welding the seam along the length of the pipe using advanced TIG (GTAW), laser, or plasma welding technologies. This continuous longitudinal seam provides a strong, uniform weld that is fully annealed to restore corrosion resistance and mechanical properties. Longitudinal welded pipe offers a cost-effective alternative to seamless pipe
Schnitt nach Größe
The Mill Finish Stainless Steel Welded Pipe is manufactured by roll forming stainless steel coil into a cylindrical shape and longitudinally welding the seam using TIG, laser, or ERW technology. The mill finish surface is the condition directly after welding and annealing, characterized by the presence of a thin oxide scale (heat tint) and the absence of any subsequent mechanical or chemical surface treatment. This economical finish is ideal for industrial applications where
