industrial welded stainless steel pipe
"
TIG aus Edelstahl geschweißtes Rohr ASTM A269 Poliert Elektropoliert
The TIG Welded Stainless Steel Pipe is manufactured using Tungsten Inert Gas (GTAW) welding technology, which produces a high-quality, consistent longitudinal weld seam with excellent penetration and minimal heat input. This process results in a smooth, clean weld bead with no spatter or oxidation, making it ideal for applications requiring superior weld integrity and corrosion resistance. TIG welded pipes are widely used in sanitary, pharmaceutical, food processing, and high
Geschweißtes rundes Rohr aus Edelstahl 304 ASTM A312 Spiegelveredelung für Handräder
Welded stainless steel round pipe is manufactured by forming a flat stainless steel strip or sheet into a cylindrical shape and welding the longitudinal seam. This process creates a cost-effective, dimensionally consistent pipe suitable for a wide range of industrial, commercial, and architectural applications. While seamless pipes are preferred for extremely high-pressure environments, welded pipes offer exceptional value for general-purpose applications where pressure
Schnitt nach Größe
The Mill Finish Stainless Steel Welded Pipe is manufactured by roll forming stainless steel coil into a cylindrical shape and longitudinally welding the seam using TIG, laser, or ERW technology. The mill finish surface is the condition directly after welding and annealing, characterized by the presence of a thin oxide scale (heat tint) and the absence of any subsequent mechanical or chemical surface treatment. This economical finish is ideal for industrial applications where
Nahtlose geschweißte 2205 Duplex-Edelstahlrohre ASTM A790
2205 duplex stainless steel pipe offers a balanced combination of high strength and excellent corrosion resistance, making it the preferred choice for industries such as oil & gas, chemical processing, marine engineering, and desalination plants. With a duplex microstructure (approximately 50% austenite + 50% ferrite), 2205 provides nearly twice the yield strength of common austenitic stainless steels like 304 or 316L, while maintaining good weldability and fabricability. Key
Schnittlose Rohre aus Edelstahl SS 310 mit hoher Temperatur
SS 310 pipe is an austenitic stainless steel grade specifically designed for high-temperature applications. With excellent oxidation resistance and good strength at elevated temperatures, this grade is the preferred choice for furnace parts, heat treatment equipment, and high-temperature industrial piping systems. The 310 grade contains high levels of chromium (24-26%) and nickel (19-22%), which provide exceptional resistance to scaling at temperatures up to 1100°C (2012°F)
Rohr aus Edelstahl 310S mit niedrigem Kohlenstoffgehalt und hoher Temperatur
310S pipe is a low-carbon version of the standard 310 stainless steel grade, specifically designed for continuous high-temperature service where prolonged exposure to elevated temperatures is required. The lower carbon content (0.08% maximum compared to 0.25% for standard 310) provides improved weldability and reduces the risk of carbide precipitation during welding or sustained high-temperature operation. Like its standard 310 counterpart, 310S contains high levels of
Nahtloses Rohr aus kohlenstoffarmem Edelstahl, schweißbar ohne Wärmebehandlung nach dem Schweißen
Low carbon seamless stainless pipe is a specialized category of austenitic stainless steel pipe with a maximum carbon content of 0.030%, significantly lower than standard grades which contain up to 0.080% carbon. This reduced carbon content provides critical advantages for welded assemblies and applications involving exposure to corrosive media in the as-welded condition. The primary benefit of low carbon stainless steel is its resistance to sensitization – the precipitation
1.4307 Nahtloser Rohr aus Edelstahl EN DIN Austenitische Klasse mit niedrigem Kohlenstoffgehalt
1.4307 seamless stainless pipe is the European (EN/DIN) designation for a low carbon austenitic stainless steel grade, equivalent to UNS S30403 and ASTM A312 TP304L. This grade is specifically designed for applications requiring excellent corrosion resistance combined with superior weldability, particularly where post-weld heat treatment is not practical or desired. The "1.4307" designation follows the EN 10088 and EN 10216-5 standards, which govern seamless stainless steel
1.4307 Nahtloser Rohr aus Edelstahl EN DIN Austenitische Klasse mit niedrigem Kohlenstoffgehalt
1.4307 seamless stainless pipe is the European (EN/DIN) designation for a low carbon austenitic stainless steel grade, equivalent to UNS S30403 and ASTM A312 TP304L. This grade is specifically designed for applications requiring excellent corrosion resistance combined with superior weldability, particularly where post-weld heat treatment is not practical or desired. The "1.4307" designation follows the EN 10088 and EN 10216-5 standards, which govern seamless stainless steel
