hydraulic stainless steel precision tubing
"
Σωλήνας χωρίς ραφή ASTM A312 304L από ανοξείδωτο χάλυβα UNS S30403 Cold Drawn Annealed Pickled
304L Stainless Steel Seamless Pipe 304L (UNS S30403) is the most widely used low-carbon austenitic stainless steel globally. With its carbon content controlled below 0.03%, 304L Stainless Steel Seamless Pipe effectively prevents intergranular corrosion after welding, making it an ideal choice for chemical, petroleum, and pharmaceutical industries requiring highly reliable welded structures. Our seamless tubes strictly adhere to the ASTM A312 standard, manufactured using cold
Αστμ Α312 Χάλυβα από ανοξείδωτο χάλυβα Χάλυβα από ανοξείδωτο χάλυβα Χάλυβα από ανοξείδωτο χάλυβα
Σωλήνας από ανοξείδωτο χάλυβα Astm A312 TP304 TP316L χωρίς συγκόλληση
Σωλήνα χωρίς ραφή από ανοξείδωτο χάλυβα TP304 TP316 για σέρβις ανθεκτικό στη διάβρωση υψηλής πίεσης
ASTM A312 seamless stainless steel pipe is manufactured in accordance with ASTM A312 / ASME SA312, specifically designed for high-pressure and corrosion-resistant applications. The seamless construction eliminates the weld line, providing uniform strength, superior reliability, and excellent performance in demanding environments. This product is available in TP304 and TP316 grades, offering a balance of cost-effectiveness and enhanced corrosion resistance. It is widely used
Χλωριούχο μαγγανικό αυστενίτικο ατσάλινο σωλήνα χωρίς ραφές UNS S20100
Chrome-manganese austenitic seamless pipe is an economical alternative to traditional chromium-nickel austenitic stainless steels such as 304 and 316. This grade achieves a stable austenitic structure by substituting a portion of expensive nickel with more cost-effective manganese and nitrogen, delivering comparable mechanical properties at a significantly lower material cost. The most common chrome-manganese austenitic grade is 201 stainless steel (UNS S20100), which
Υψηλής αντοχής διαρθρωτική τετραγωνική κούφια τομή από ανοξείδωτο χάλυβα για εφαρμογές υποστήριξης φορτίου
Stainless steel hollow section square tube is a structural profile with four equal sides and an empty interior. This design provides a high strength-to-weight ratio, making it ideal for load-bearing applications while minimizing material usage. Our hollow section square tubes are manufactured from premium stainless steel grades and are available in both welded and seamless options. They offer excellent corrosion resistance, structural integrity, and a clean, modern appearance
TP304 / TP316L Φωτεινός αναμμένος σωλήνας από ανοξείδωτο χάλυβα
Bright annealed stainless steel tube is manufactured through a specialized heat treatment process performed in a controlled atmosphere furnace (hydrogen or vacuum). This process produces a clean, oxide-free, bright surface without the need for pickling or post-treatment. The result is a tube with excellent surface finish, improved corrosion resistance, and superior mechanical properties.Key Features:Oxide-free, bright surface finish (Ra ≤ 0.4μm)No pickling required –
ASTM A789 UNS S32760 Super Duplex σωλήνας από ανοξείδωτο χάλυβα για ακραία περιβάλλοντα
ASTM A789 UNS S32760 Tube Super Duplex από ανοξείδωτο χάλυβα για ακραία περιβάλλοντα
Υψηλής πίεσης διπλής σωλήνας από ανοξείδωτο χάλυβα 550 MPa Δυνατότητα απόδοσης Αντίσταση στη διάβρωση
High pressure duplex stainless steel pipe is specifically designed and manufactured to withstand extreme internal pressures while maintaining structural integrity and corrosion resistance. The unique two-phase microstructure (austenite + ferrite) provides approximately twice the yield strength of standard austenitic stainless steels such as 304 and 316, allowing for significantly thinner wall sections at equivalent pressure ratings. Our high pressure duplex pipes are produced
UNS S30403 Χάλυβα από ανοξείδωτο χάλυβα Χάλυβα από ανοξείδωτο χάλυβα
UNS S30403 seamless pipe is a low carbon version of the standard 304 austenitic stainless steel, designed for applications requiring enhanced resistance to intergranular corrosion after welding or elevated temperature exposure. The "UNS S30403" designation corresponds to the Unified Numbering System for metals, identifying a composition of 18-20% chromium and 8-12% nickel, with a maximum carbon content of 0.030%. The low carbon content is the defining characteristic of UNS
