colored stainless steel sheet polished
"
Nahtlose Rohre aus Edelstahl mit niedrigem Nickelgehalt für strukturelle dekorative korrosive Umgebungen
Low-nickel stainless steel seamless tube is an economical alternative to traditional austenitic stainless steels such as 304 and 316. By reducing nickel content and increasing manganese and nitrogen, this grade achieves a balanced austenitic structure at a significantly lower material cost, making it an attractive choice for general industrial applications where extreme corrosion resistance is not the primary requirement. The most common low-nickel austenitic grade is 201
Schnittlose Rohre aus Edelstahl SS 310 mit hoher Temperatur
SS 310 pipe is an austenitic stainless steel grade specifically designed for high-temperature applications. With excellent oxidation resistance and good strength at elevated temperatures, this grade is the preferred choice for furnace parts, heat treatment equipment, and high-temperature industrial piping systems. The 310 grade contains high levels of chromium (24-26%) and nickel (19-22%), which provide exceptional resistance to scaling at temperatures up to 1100°C (2012°F)
1.4404 Edelstahl-nahtloses Rohr, Chlorid-Säurebeständigkeit
1.4404 seamless stainless pipe is the European (EN/DIN) designation for low carbon, molybdenum-bearing austenitic stainless steel, equivalent to UNS S31603 and ASTM A312 TP316L. This grade is specifically designed for applications requiring superior corrosion resistance combined with excellent weldability, particularly where post-weld heat treatment is not practical or desired. The "1.4404" designation follows the EN 10088 and EN 10216-5 standards, which govern seamless
UNS S30403 Nahtloser Rohr aus Edelstahl TP304L Schweißbar ohne Wärmebehandlung nach dem Schweißen
UNS S30403 seamless pipe is a low carbon version of the standard 304 austenitic stainless steel, designed for applications requiring enhanced resistance to intergranular corrosion after welding or elevated temperature exposure. The "UNS S30403" designation corresponds to the Unified Numbering System for metals, identifying a composition of 18-20% chromium and 8-12% nickel, with a maximum carbon content of 0.030%. The low carbon content is the defining characteristic of UNS
Rechteckiges Hohlprofil aus Edelstahl 316 in Marinequalität, geschweißt nach ASTM A554
Marine grade rectangular hollow section (RHS) refers to 316 stainless steel rectangular tubing specifically designed for applications in coastal, offshore, and marine environments where standard 304 stainless steel would be susceptible to pitting and corrosion from chloride exposure. The addition of 2-3% molybdenum to the 316 grade provides significantly enhanced resistance to pitting, crevice corrosion, and stress corrosion cracking in seawater, salt spray, and chloride-rich
Geschweißtes rundes Rohr aus Edelstahl 304 ASTM A312 Spiegelveredelung für Handräder
Welded stainless steel round pipe is manufactured by forming a flat stainless steel strip or sheet into a cylindrical shape and welding the longitudinal seam. This process creates a cost-effective, dimensionally consistent pipe suitable for a wide range of industrial, commercial, and architectural applications. While seamless pipes are preferred for extremely high-pressure environments, welded pipes offer exceptional value for general-purpose applications where pressure
Rohr aus Edelstahl 310S mit niedrigem Kohlenstoffgehalt und hoher Temperatur
310S pipe is a low-carbon version of the standard 310 stainless steel grade, specifically designed for continuous high-temperature service where prolonged exposure to elevated temperatures is required. The lower carbon content (0.08% maximum compared to 0.25% for standard 310) provides improved weldability and reduces the risk of carbide precipitation during welding or sustained high-temperature operation. Like its standard 310 counterpart, 310S contains high levels of
Edelstahl nahtloses rundes Rohr poliert gegossen hohe Korrosionsbeständigkeit
Our stainless steel seamless round tubes are manufactured through precision cold drawing or hot rolling processes, resulting in a uniform wall thickness, smooth surface finish, and complete absence of weld seams. These tubes offer excellent corrosion resistance, high-temperature performance, and reliable mechanical strength. They are widely used in fluid transport, structural support, and machinery manufacturing. Various surface finishes (annealed, pickled, polished, bright
ASTM A213 Rohr aus Edelstahl Wärmetauscher Korrosionsbeständiges U-Bogenrohr
U-bend stainless steel heat exchanger tubes are seamless or welded tubes precision-formed into a U-shape, designed specifically for shell and tube heat exchangers. This U-configuration allows the tube bundle to expand and contract freely under thermal stress while eliminating the need for a second tube sheet, making the entire heat exchanger more compact, cost-effective, and easier to maintain. Manufactured from high-quality austenitic stainless steel grades such as 304, 304L
