stainless steel seamless round tube
"
ASTM A789 2205 Duplex Stainless Steel Precision Pipe Seamless Corrosion Resistant
ASTM A789 2205 duplex seamless tube is a standard specification for seamless duplex stainless steel tubes intended for general corrosion-resistant and high-strength applications. Grade 2205 (UNS S32205 / S31803) is the most widely used duplex stainless steel, offering approximately twice the yield strength of common austenitic grades like 304 or 316, combined with excellent resistance to chloride stress corrosion cracking (SCC), pitting, and crevice corrosion. These tubes are
Seamless Stainless Steel Round Pipe ASTM A312 304/304L/316/316L Schedule 10S To XXS
Seamless stainless steel round pipe is manufactured without any weld seam, created by extruding a solid billet through a mandrel to form a hollow tube. This process results in a pipe with uniform wall thickness, superior pressure resistance, and excellent structural integrity making it the preferred choice for high-pressure, high-temperature, and corrosive environments. Unlike welded pipes, seamless pipes have no weak points along the longitudinal seam, offering reliable
Cold Drawn Stainless Steel Round Pipe ASTM A269 High Pressure Stainless Steel Tubing
Cold drawn stainless steel round pipe is manufactured through a multi-stage drawing process that pulls a hot-rolled or extruded tube through a die at room temperature. This cold working process produces a pipe with superior dimensional accuracy, smoother surface finish, enhanced mechanical properties, and tighter wall thickness tolerances compared to hot finished alternatives. The cold drawing process work-hardens the material, increasing tensile and yield strength while
Large Diameter Stainless Steel Welded Pipe 304 / 316L Acid And Alkali Resistant
Large Diameter Stainless Steel Welded Pipe 304/316LLarge diameter stainless steel welded pipe is typically defined as pipe with an outer diameter exceeding 16 inches (406 mm). These pipes are manufactured by roll-forming stainless steel coils or plates into tubular shapes, followed by longitudinal welding, using processes such as SAW (Submerged Arc Welding) or LSAW (Longitudinal Submerged Arc Welding) for diameters up to 3000mm.Unlike seamless pipes, which are extruded from
Corrosion Resistant Round Stainless Steel Pipe For Marine Chemical Applications
The High Corrosion Resistance Round Pipe is engineered from premium stainless steel grades with optimized chromium, nickel, and molybdenum content to withstand aggressive environments where standard steel pipes would rapidly degrade. This pipe provides exceptional protection against rust, pitting, crevice corrosion, and stress corrosion cracking caused by chlorides, acids, alkalis, and marine atmospheres. Available in seamless or welded construction, it delivers long-term
ASTM A500 Stainless Steel Square Pipe Grade B Structural Square Hollow Section
What Is ASTM A500? ASTM A500 is the American standard for cold-formed welded and seamless carbon steel structural tubing in round, square, and rectangular shapes. It is the go-to specification for structural applications where strength, weldability, and economy are required. Square steel tubes under ASTM A500 are produced as cold-formed welded tubes, then heat-treated to remove internal stresses and improve mechanical properties. The standard covers four grades: A, B, C, and
Chrome Manganese Austenitic Seamless Pipe Low Nickel Alternative For Industrial Applications
Chrome-Manganese Austenitic Seamless Pipe with Mill Test Certificate The Chrome-Manganese Austenitic Seamless Pipe is an austenitic chromium-nickel-manganese alloy that provides an economical solution for moderately corrosive environments. Compared to standard carbon steel, it delivers superior oxidation resistance and significantly higher mechanical strength. At ZhongCheng, we manufacture these pipes in strict accordance with ASTM A554 / A312 standards, ensuring precise
Corrosion Resistant Inconel 600 Seamless Pipe High Temperature Nickel Chromium Alloy
Inconel 600 (UNS N06600, W.Nr. 2.4816, Alloy 600) is a standard engineering material that has proven itself across industries for over half a century. This nickel-chromium alloy delivers an exceptional combination of high temperature strength (up to 2000F / 1093C), excellent corrosion resistance, and superior workability. Unlike many high-performance alloys, Inconel 600 is not precipitation hardenable it is strengthened only by cold work. This characteristic, combined
TP316L SMLS Pipe Low Carbon Molybdenum Bearing Seamless Pipe
TP316L SMLS pipe is a low carbon, molybdenum-bearing austenitic seamless stainless steel pipe designed for superior corrosion resistance in aggressive environments. The "TP" designation indicates that the pipe meets the requirements of ASTM A312, the standard specification for seamless, welded, and heavily cold worked austenitic stainless steel pipes. "SMLS" denotes seamless construction, meaning no longitudinal weld seam exists. The low carbon content (0.030% maximum)
