316l seamless stainless steel tubing
"
2205 أنابيب مستديرة من الفولاذ المقاوم للصدأ UNS S32205 غير الملحومة للنفط والغاز التطبيقات البحرية
2205 stainless steel round tube is a high-strength, highly corrosion-resistant specialty pipe material. Its microstructure consists of approximately 50% ferrite and 50% austenite in a duplex configuration. This unique microstructure gives it nearly twice the yield strength of ordinary stainless steel, while also exhibiting excellent resistance to stress corrosion cracking in chloride ion environments.Compared to 304 and 316L austenitic stainless steels, 2205 can withstand
أنابيب الفولاذ المقاوم للصدأ مزدوجة الهيكلية UNS S32101 أنابيب النيكل السفلى عالية القوة
UNS S32101 is a lean duplex stainless steel grade that offers a balanced combination of good strength, excellent corrosion resistance, and cost-effectiveness. It belongs to the lean duplex family (also known as LDX 2101®), containing lower nickel and molybdenum than standard duplex grades like 2205, making it a more economical alternative without significantly compromising performance. Manufactured in accordance with ASTM A789 and ASTM A790, UNS S32101 tubes are available in
TP304 TP316 أنابيب بلا خيوط من الفولاذ المقاوم للصدأ لخدمة مقاومة للتآكل تحت الضغط العالي
ASTM A312 seamless stainless steel pipe is manufactured in accordance with ASTM A312 / ASME SA312, specifically designed for high-pressure and corrosion-resistant applications. The seamless construction eliminates the weld line, providing uniform strength, superior reliability, and excellent performance in demanding environments. This product is available in TP304 and TP316 grades, offering a balance of cost-effectiveness and enhanced corrosion resistance. It is widely used
UNS S31803 الأنابيب غير الملحومة ASTM A789 4 "جدول 40 أنابيب الفولاذ المقاوم للصدأ
UNS S31803 duplex stainless steel pipe is a widely used duplex grade that offers a balanced mix of good strength, excellent corrosion resistance, and cost-effectiveness. It is the original standard duplex stainless steel, commonly specified in ASTM A790 and ASTM A789 for both seamless and welded pipe applications.With a dual-phase microstructure (austenite + ferrite), UNS S31803 provides approximately twice the yield strength of 304 or 316L austenitic stainless steels, while
أنابيب الدقة عالية القوة من الفولاذ المقاوم للصدأ ASTM A789 مقاوم للتآكل
ASTM A789 / A789M covers the requirements for seamless and welded duplex stainless steel tubes for general corrosion-resistant service, with particular emphasis on resistance to stress corrosion cracking. This product combines the excellent toughness of austenitic stainless steel with the high strength of ferritic stainless steel, while offering superior resistance to chloride-induced pitting and crevice corrosion. This product covers common grades including UNS S31803,
الأنابيب المزدوجة من الفولاذ المقاوم للصدأ 2205 2507 الأنابيب الخالية من اللحام المسحوبة باردة
Seamless duplex stainless steel tube is manufactured without any weld seam, produced by extruding a solid billet of duplex stainless steel into a hollow tube through a piercing and rolling process. The absence of a weld seam provides superior strength, uniform wall thickness, and excellent performance under high pressure, high temperature, and corrosive conditions. Our seamless duplex tubes offer the unique combination of high strength (approximately twice that of austenitic
الدقة العالية 304 الصلب المقاوم للتآكل
304 Stainless Steel Seamless Pipe The 304 stainless steel seamless pipe is a globally recognized standard grade in the stainless steel family. With a chemical composition of 18% chromium and 8% nickel, it offers excellent corrosion resistance, high toughness, and outstanding formability. Manufactured using precision seamless cold-rolling technology, this pipe delivers a superior surface finish, tight dimensional tolerances, and consistent mechanical properties — making it the
ASTM A312 304L أنابيب الفولاذ المقاوم للصدأ غير الملحومة UNS S30403 مخلل مسحوب على البارد
304L Stainless Steel Seamless Pipe 304L (UNS S30403) is the most widely used low-carbon austenitic stainless steel globally. With its carbon content controlled below 0.03%, 304L Stainless Steel Seamless Pipe effectively prevents intergranular corrosion after welding, making it an ideal choice for chemical, petroleum, and pharmaceutical industries requiring highly reliable welded structures. Our seamless tubes strictly adhere to the ASTM A312 standard, manufactured using cold
201 أنابيب بلا مسام من الفولاذ المقاوم للصدأ ASTM A554 SS أنابيب بلا مسام مع معدل تصلب عال
201 Stainless Steel Seamless Pipe ASTM A554 SS Tube with Mill Test Certificate The 201 Stainless Steel Seamless Pipe is an austenitic chromium-nickel-manganese alloy that provides an economical solution for moderately corrosive environments. Compared to standard carbon steel, it delivers superior oxidation resistance and significantly higher mechanical strength. At ZhongCheng, we manufacture these pipes in strict accordance with ASTM A554 / A312 standards, ensuring precise
