no 4 stainless steel sheet
"
304 thép không gỉ tấm cán lạnh / 2B kết thúc tấm thép không gỉ
2B finish stainless steel sheet is the most widely used surface finish in the stainless steel industry worldwide. The "2B" designation refers to a specific mill finish achieved through cold rolling, annealing, pickling, and a final light skin pass on polished rolls.The result is a smooth, semi-reflective, matte surface — often described as a "cloudy mirror" — that offers the perfect balance of aesthetics, hygiene, and cost-effectiveness for general fabrication work.Unlike
Tấm dập nổi bằng thép không gỉ 304 316 có hoa văn cho nội thất hành lang
Embossed stainless steel sheet for architecture is specifically designed for use in building interiors, exteriors, and decorative architectural applications. The raised patterns create visual texture, enhance aesthetic appeal, and provide practical benefits such as scratch concealment and reduced maintenance visibility.Our architectural embossed sheets are manufactured from premium stainless steel grades and are available in a wide variety of patterns, including leather grain
Kháng ăn mòn ống thép không gỉ cao độ bền
Duplex stainless steel sheet is a family of stainless steel grades with a mixed austenitic-ferritic microstructure (approximately 50% austenite / 50% ferrite). This unique structure delivers approximately twice the yield strength of standard austenitic grades like 304 or 316, combined with excellent resistance to chloride stress corrosion cracking (SCC), pitting, and crevice corrosion. Duplex stainless steel sheets are the material of choice for demanding applications in
201 Thép không gỉ Bảng dán kim cương Bảng chống trượt chống ăn mòn
The 201 Stainless Steel Checkered Plate (also known as diamond plate, tread plate, or chequered plate) features a raised diamond pattern on one side and a smooth reverse side. This design provides excellent anti-slip properties while maintaining the durability and corrosion resistance of stainless steel. Grade 201 is an austenitic chromium-manganese stainless steel developed as a cost-effective alternative to 304 grade. It offers good mechanical properties and workability,
Chính xác 301 304 316 430 Dải thép không gỉ cuộn lạnh 2B BA No.4
Precision cold rolled stainless steel strip is a narrow, thin-gauge stainless steel product manufactured to significantly tighter thickness and width tolerances than standard cold-rolled sheet. Unlike standard sheet (typically 1000mm or 1219mm wide), precision strip is produced in narrow widths — usually less than 600mm — and thin gauges from 0.05mm up to 3.0mm. The key differentiator is the tolerance : the precision strip holds thickness variations to as low as ±0.005mm,
Super Duplex 2507 tấm thép không gỉ UNS S32750 Kháng ăn mòn cường độ cao
Super Duplex 2507 (UNS S32750) sheets represent the highest level of duplex stainless steel technology, offering an exceptional combination of mechanical strength and corrosion resistance. This advanced material is specifically engineered for service in the most demanding environments, including high-chloride seawater, acid chloride media, and sour gas applications. The designation "Super Duplex" refers to the premium grade of duplex stainless steel with a Pitting Resistance
Martensitic 420 Stainless Steel Cold Rolling Sheet Độ cứng cao Kháng mòn
Tấm 420 ss Độ cứng cao Chống mài mòn Khả năng đánh bóng tốt
1.4307 Bơm không thép không may EN DIN Cấp độ Austenitic carbon thấp
1.4307 seamless stainless pipe is the European (EN/DIN) designation for a low carbon austenitic stainless steel grade, equivalent to UNS S30403 and ASTM A312 TP304L. This grade is specifically designed for applications requiring excellent corrosion resistance combined with superior weldability, particularly where post-weld heat treatment is not practical or desired. The "1.4307" designation follows the EN 10088 and EN 10216-5 standards, which govern seamless stainless steel
1.4307 Bơm không thép không may EN DIN Cấp độ Austenitic carbon thấp
1.4307 seamless stainless pipe is the European (EN/DIN) designation for a low carbon austenitic stainless steel grade, equivalent to UNS S30403 and ASTM A312 TP304L. This grade is specifically designed for applications requiring excellent corrosion resistance combined with superior weldability, particularly where post-weld heat treatment is not practical or desired. The "1.4307" designation follows the EN 10088 and EN 10216-5 standards, which govern seamless stainless steel
