stainless steel cold rolled sheet high hardness
"
마르텐시틱 420 스테인리스 스틸 콜드 롤 플라크 고 강도 마모 저항성
420 ss 시트 고경도 내마모성 우수한 광택성
420 스테인리스 스틸 냉장 롤 엽 정밀 차원 밝은 표면 마무리
420 cold-rolled stainless steel sheet is a high-carbon martensitic stainless steel produced through precision cold rolling processes. The cold rolling operation imparts superior surface finish, tight dimensional tolerances, and enhanced mechanical properties compared to hot-rolled equivalents. This grade offers high hardness (after heat treatment), good wear resistance, and moderate corrosion resistance. It is widely used in applications requiring a combination of sharp
ASTM A240 UNS S32760 스테인리스 스틸 열불판 슈퍼 듀플렉스 스테인리스 스틸 엽
UNS S32760 is a super duplex stainless steel plate that offers an exceptional combination of high strength and outstanding corrosion resistance. This grade is designed for service in aggressive environments where conventional stainless steels such as 316L or even standard duplex grades like 2205 are insufficient. The chemical composition of S32770 is carefully balanced with high levels of chromium, molybdenum, and nitrogen, along with a controlled addition of tungsten and
정밀 301 304 316 430 냉간 압연 스테인레스 스틸 스트립 2B BA No.4 마감
Precision cold rolled stainless steel strip is a narrow, thin-gauge stainless steel product manufactured to significantly tighter thickness and width tolerances than standard cold-rolled sheet. Unlike standard sheet (typically 1000mm or 1219mm wide), precision strip is produced in narrow widths — usually less than 600mm — and thin gauges from 0.05mm up to 3.0mm. The key differentiator is the tolerance : the precision strip holds thickness variations to as low as ±0.005mm,
고온 스테인레스 스틸 SS 310 엑스트림 열 서비스용 꿰매지 않는 파이프
SS 310 pipe is an austenitic stainless steel grade specifically designed for high-temperature applications. With excellent oxidation resistance and good strength at elevated temperatures, this grade is the preferred choice for furnace parts, heat treatment equipment, and high-temperature industrial piping systems. The 310 grade contains high levels of chromium (24-26%) and nickel (19-22%), which provide exceptional resistance to scaling at temperatures up to 1100°C (2012°F)
용접 된 304 스테인리스 스틸 원형 파이프 ASTM A312 수레 레일링에 대한 거울 마무리
Welded stainless steel round pipe is manufactured by forming a flat stainless steel strip or sheet into a cylindrical shape and welding the longitudinal seam. This process creates a cost-effective, dimensionally consistent pipe suitable for a wide range of industrial, commercial, and architectural applications. While seamless pipes are preferred for extremely high-pressure environments, welded pipes offer exceptional value for general-purpose applications where pressure
슈퍼 듀플렉스 2507 스테인리스 스틸 시트 ASTM A240 고강성 부식 저항성
ASTM A240 Super Duplex 2507 (UNS S32750) is a high-strength, corrosion-resistant stainless steel plate with a ferritic-austenitic microstructure. It offers approximately three times the yield strength of 316L and a PREN value of 40 or higher, providing exceptional resistance to pitting, crevice corrosion, and chloride stress corrosion cracking. Ideal for the most demanding environments, Super Duplex 2507 is widely used in offshore platforms, chemical processing, seawater
420 마르텐사이트계 스테인리스 장 열간압연/냉각 압연된 0.4mm - 100mm 간격
고경도 용도를 위한 420 스테인리스 판 마르텐사이트 등급
UNS S32750 304 316L 공격적인 환경에 대한 듀플렉스 스테인리스 스틸 엽
UNS S32750 is a super duplex stainless steel sheet that delivers outstanding corrosion resistance combined with high mechanical strength. This grade is specifically engineered for service in extremely aggressive environments, including high-chloride seawater, acid chloride media, and sour gas applications. As a super duplex grade, UNS S32750 features a balanced microstructure of approximately 50% austenite and 50% ferrite. This dual-phase structure provides approximately
