grade 50 stainless steel hot rolled plate
"
ASTM A572 등급 50 스테인레스 강 열간압연 판 고강도 저합금 HSLA 판
A572 Grade 50 steel plate (also known as ASTM A572 Gr. 50, HSLA steel plate, A572-50 structural plate, and high-strength low-alloy steel plate) is a high-strength, low-alloy (HSLA) structural steel plate widely used in construction, bridges, heavy machinery, and transmission towers. Grade 50 offers a minimum yield strength of 50 ksi (345 MPa), providing an excellent strength-to-weight ratio that allows for lighter, more economical structures compared to conventional carbon
ASTM A240 UNS S32760 스테인리스 스틸 열불판 슈퍼 듀플렉스 스테인리스 스틸 엽
UNS S32760 is a super duplex stainless steel plate that offers an exceptional combination of high strength and outstanding corrosion resistance. This grade is designed for service in aggressive environments where conventional stainless steels such as 316L or even standard duplex grades like 2205 are insufficient. The chemical composition of S32770 is carefully balanced with high levels of chromium, molybdenum, and nitrogen, along with a controlled addition of tungsten and
2207 스테인리스 스틸 열불판 극한 환경용 슈퍼 듀플렉스 등급
2207 스테인리스 강판, 극한 환경을 위한 슈퍼 듀플렉스 등급
마르텐시틱 420 스테인리스 스틸 콜드 롤 플라크 고 강도 마모 저항성
420 ss 시트 고경도 내마모성 우수한 광택성
420 스테인리스 스틸 냉장 롤 엽 정밀 차원 밝은 표면 마무리
420 cold-rolled stainless steel sheet is a high-carbon martensitic stainless steel produced through precision cold rolling processes. The cold rolling operation imparts superior surface finish, tight dimensional tolerances, and enhanced mechanical properties compared to hot-rolled equivalents. This grade offers high hardness (after heat treatment), good wear resistance, and moderate corrosion resistance. It is widely used in applications requiring a combination of sharp
420 마르텐사이트계 스테인리스 장 열간압연/냉각 압연된 0.4mm - 100mm 간격
고경도 용도를 위한 420 스테인리스 판 마르텐사이트 등급
평면 304 스테인레스 스틸 웰딩 파이프 레이저 절단 처리
304 stainless steel welded pipe is manufactured by roll-forming stainless steel coil or plate into a tubular shape followed by longitudinal welding. As an austenitic stainless steel grade, it offers excellent corrosion resistance, high dimensional accuracy, and a bright surface finish. The production process is efficient, cost-effective, and available in a wide range of sizes and specifications. Products are available as longitudinally welded pipe or spiral welded pipe. 304
슈퍼 듀플렉스 스테인리스 스틸 판 고강성 부식 저항성
Super duplex stainless steel plate is a high-performance material that combines the advantageous properties of both austenitic and ferritic stainless steel microstructures. With a balanced duplex microstructure (approximately 50% ferrite / 50% austenite), super duplex grades offer approximately twice the yield strength of conventional austenitic stainless steels (e.g., 304, 316) while providing exceptional resistance to pitting, crevice corrosion, and stress corrosion
슈퍼 듀플렉스 2507 스테인리스 스틸 시트 ASTM A240 고강성 부식 저항성
ASTM A240 Super Duplex 2507 (UNS S32750) is a high-strength, corrosion-resistant stainless steel plate with a ferritic-austenitic microstructure. It offers approximately three times the yield strength of 316L and a PREN value of 40 or higher, providing exceptional resistance to pitting, crevice corrosion, and chloride stress corrosion cracking. Ideal for the most demanding environments, Super Duplex 2507 is widely used in offshore platforms, chemical processing, seawater
