cold drawn seamless pipe
"
구조상 장식적인 부식성 환경을 위한 낮은 니켈 스테인리스 이음새가 없는 관
Low-nickel stainless steel seamless tube is an economical alternative to traditional austenitic stainless steels such as 304 and 316. By reducing nickel content and increasing manganese and nitrogen, this grade achieves a balanced austenitic structure at a significantly lower material cost, making it an attractive choice for general industrial applications where extreme corrosion resistance is not the primary requirement. The most common low-nickel austenitic grade is 201
TP304 /TP 316L 스테인리스 스틸 정밀 파이프 OD 1.6mm - 50.8mm ASTM A269
ASTM A269 precision stainless steel pipe is manufactured to the strict requirements of the ASTM A269 standard, which covers seamless and welded austenitic stainless steel tubing for general corrosion-resistant and high-temperature service. This pipe offers excellent dimensional accuracy, clean internal surfaces, and reliable mechanical properties, making it ideal for instrumentation, medical, and other precision applications. Key Features: Compliant with ASTM A269 standard
가접된 아우스테니틱 스테인리스 스틸 파이프 ASTM A312 TP304 TP316
ASTM A312 stainless steel pipe is a high-performance austenitic stainless steel pipe manufactured in accordance with ASTM A312 / ASME SA312, available in both seamless and welded types. This series of pipes offers excellent corrosion resistance, high-temperature strength, and good workability. It is widely used in industries such as oil and gas, chemical processing, power generation, marine engineering, water treatment, and pressure vessels. Full-size ranges, multiple grades,
고강성 스테인리스 스틸 정밀 파이프 ASTM A789
ASTM A789 / A789M covers the requirements for seamless and welded duplex stainless steel tubes for general corrosion-resistant service, with particular emphasis on resistance to stress corrosion cracking. This product combines the excellent toughness of austenitic stainless steel with the high strength of ferritic stainless steel, while offering superior resistance to chloride-induced pitting and crevice corrosion. This product covers common grades including UNS S31803,
제 40 조 스테인리스 스틸 파이프 공정 유틸리티 애플리케이션을 위해 매듭없이 웰드
Schedule 40 Stainless Steel Pipe is a standard wall thickness pipe widely used in industrial, commercial, and residential applications. It offers a balanced combination of strength, corrosion resistance, and cost-effectiveness. Manufactured from high-quality austenitic stainless steel grades such as 304 and 316, this pipe is suitable for fluid transport, structural support, and process piping systems. Schedule 40 wall thickness provides higher pressure ratings than Schedule
고압 이중 스테인레스 강관 550 MPa 항복 강도 내식성
High pressure duplex stainless steel pipe is specifically designed and manufactured to withstand extreme internal pressures while maintaining structural integrity and corrosion resistance. The unique two-phase microstructure (austenite + ferrite) provides approximately twice the yield strength of standard austenitic stainless steels such as 304 and 316, allowing for significantly thinner wall sections at equivalent pressure ratings. Our high pressure duplex pipes are produced
ASTM A789 2205 듀플렉스 스테인레스 스틸 정밀 파이프
ASTM A789 2205 유압 공정 라인에 대한 부식 방지 이중 이음매 없는 튜브
피하 바늘 센서를 위한 높은 관용 스테인레스 스틸 정밀 파이프
High tolerance stainless steel tube is manufactured with extreme precision, offering exceptional dimensional accuracy and consistency. It is designed for applications where even minor deviations in inner or outer diameter can affect assembly or performance. Available in seamless or welded construction, this tube delivers reliability and repeatability. Key Features: Tight tolerance: OD / ID up to ±0.01mm – ±0.03mm Surface finish: Ra ≤ 0.3μm (mirror finish available) Straightne
2507 슈퍼 듀플렉스 스테인리스 스틸 파이프 S32760 고압 서비스
2507 super duplex stainless steel pipe is a high-performance duplex grade with a two-phase microstructure consisting of approximately 50% austenite and 50% ferrite. It belongs to the super duplex family and offers exceptional strength combined with outstanding corrosion resistance. With a Pitting Resistance Equivalent Number (PREN) exceeding 41, 2507 provides superior resistance to pitting, crevice corrosion, and stress corrosion cracking in the harshest environments,
