high temperature nickel chromium alloy
"
ASTM A240 UNS S32760 ステンレス鋼のホットロールプレート スーパーデュプレックスステンレス鋼板
UNS S32760 is a super duplex stainless steel plate that offers an exceptional combination of high strength and outstanding corrosion resistance. This grade is designed for service in aggressive environments where conventional stainless steels such as 316L or even standard duplex grades like 2205 are insufficient. The chemical composition of S32770 is carefully balanced with high levels of chromium, molybdenum, and nitrogen, along with a controlled addition of tungsten and
UNS S31803 シームレス パイプ ASTM A789 4" スケジュール 40 ステンレス鋼パイプ
UNS S31803 duplex stainless steel pipe is a widely used duplex grade that offers a balanced mix of good strength, excellent corrosion resistance, and cost-effectiveness. It is the original standard duplex stainless steel, commonly specified in ASTM A790 and ASTM A789 for both seamless and welded pipe applications.With a dual-phase microstructure (austenite + ferrite), UNS S31803 provides approximately twice the yield strength of 304 or 316L austenitic stainless steels, while
TP316L SMLS パイプ 低炭素モリブデンム軸承シームレスパイプ
TP316L SMLS pipe is a low carbon, molybdenum-bearing austenitic seamless stainless steel pipe designed for superior corrosion resistance in aggressive environments. The "TP" designation indicates that the pipe meets the requirements of ASTM A312, the standard specification for seamless, welded, and heavily cold worked austenitic stainless steel pipes. "SMLS" denotes seamless construction, meaning no longitudinal weld seam exists. The low carbon content (0.030% maximum)
ASTM A789 UNS S32750 オフショア潜水用デュプレックスステンレス鋼管
ASTM A789 UNS S32750 super duplex stainless steel tube is a premium-grade product designed for the most demanding industrial applications. With a higher chromium, molybdenum, and nitrogen content than standard duplex grades (e.g., 2205/S31803), UNS S32750 offers superior strength and exceptional corrosion resistance, particularly in aggressive chloride-containing environments. This tube is manufactured in accordance with ASTM A789, covering both seamless and welded ferritic
耐食性の極度の二相鋼管 6.0mm - 1829mm OD ASTM A790 A789 A928
Corrosion resistant duplex steel pipe is specifically engineered for service in aggressive environments where standard stainless steels such as 304 and 316 are prone to failure. The unique two-phase microstructure (austenite + ferrite) combined with elevated levels of chromium, molybdenum, and nitrogen provides exceptional resistance to a wide range of corrosive attack mechanisms. Our duplex steel pipes offer outstanding protection against pitting, crevice corrosion, stress
2205 化学工業のための二相ステンレス鋼の管 1/8" - 36" OD
Duplex stainless steel pipe for the chemical industry is specifically engineered to withstand the aggressive corrosive environments, high pressures, and elevated temperatures commonly encountered in chemical processing facilities. The unique two-phase microstructure (austenite + ferrite) combined with high chromium, molybdenum, and nitrogen content provides exceptional resistance to a wide range of organic and inorganic chemicals. Our duplex pipes are widely specified for
縫い目なし 溶接 2205 デュプレックスステンレス鋼管 ASTM A790
2205 duplex stainless steel pipe offers a balanced combination of high strength and excellent corrosion resistance, making it the preferred choice for industries such as oil & gas, chemical processing, marine engineering, and desalination plants. With a duplex microstructure (approximately 50% austenite + 50% ferrite), 2205 provides nearly twice the yield strength of common austenitic stainless steels like 304 or 316L, while maintaining good weldability and fabricability. Key
大直径ステンレス鋼の溶接管 304 / 316L 酸とアルカリ耐性
Large Diameter Stainless Steel Welded Pipe 304/316LLarge diameter stainless steel welded pipe is typically defined as pipe with an outer diameter exceeding 16 inches (406 mm). These pipes are manufactured by roll-forming stainless steel coils or plates into tubular shapes, followed by longitudinal welding, using processes such as SAW (Submerged Arc Welding) or LSAW (Longitudinal Submerged Arc Welding) for diameters up to 3000mm.Unlike seamless pipes, which are extruded from
UNS S32750 304 316L 攻撃的な環境のための二相ステンレス鋼シート
UNS S32750 is a super duplex stainless steel sheet that delivers outstanding corrosion resistance combined with high mechanical strength. This grade is specifically engineered for service in extremely aggressive environments, including high-chloride seawater, acid chloride media, and sour gas applications. As a super duplex grade, UNS S32750 features a balanced microstructure of approximately 50% austenite and 50% ferrite. This dual-phase structure provides approximately
