ss seamless tube
"
Hochpräzises nahtloses Rohr aus Edelstahl 304, kaltgewalzt, Korrosionsbeständigkeit
304 Stainless Steel Seamless Pipe The 304 stainless steel seamless pipe is a globally recognized standard grade in the stainless steel family. With a chemical composition of 18% chromium and 8% nickel, it offers excellent corrosion resistance, high toughness, and outstanding formability. Manufactured using precision seamless cold-rolling technology, this pipe delivers a superior surface finish, tight dimensional tolerances, and consistent mechanical properties — making it the
Schnittlose Rohre aus Edelstahl SS 310 mit hoher Temperatur
SS 310 pipe is an austenitic stainless steel grade specifically designed for high-temperature applications. With excellent oxidation resistance and good strength at elevated temperatures, this grade is the preferred choice for furnace parts, heat treatment equipment, and high-temperature industrial piping systems. The 310 grade contains high levels of chromium (24-26%) and nickel (19-22%), which provide exceptional resistance to scaling at temperatures up to 1100°C (2012°F)
Tabelle 40 80 Edelstahl 304 nahtlose Rohre ASTM A312 TP304
Our Stainless Steel 304 Seamless Pipe is manufactured to ASTM A312 TP304 standards, offering exceptional corrosion resistance, high-temperature strength, and dimensional precision. Produced by extruding solid billet without any weld seam, this seamless stainless steel pipe is the preferred choice for critical applications in chemical processing, food & beverage, pharmaceutical, oil & gas, and power generation industries where weld integrity is a primary concern. Available in
Warmgewalzte SS-SMLS-Rohre Warmgefertigte nahtlose Bauweise aus Edelstahl
Hot Rolled Stainless Steel SMLS Pipe is manufactured by heating a solid stainless steel billet to approximately 1200°C (2200°F) and then rolling it through a series of mills to form a hollow tube. This high-temperature forming process allows for the production of large diameter, thick wall pipes that cannot be efficiently manufactured through cold drawing methods. Hot rolled seamless pipes are the backbone of heavy industrial piping systems, offering excellent mechanical
S355J2H Rechteckige Rohre, nahtlose, warm geschweißte, fertig gefertigte Strukturhöhle
S355J2H is a European standard hot-finished seamless or welded structural hollow section specified under EN 10210-2. The "S" stands for structural steel, "355" indicates minimum yield strength of 355 MPa (at 16mm thickness), "J2" denotes impact testing at -20°C, and "H" signifies hollow section. S355J2H Rectangular Tube is widely used in load-bearing structures, steel frameworks, bridges, cranes, and heavy machinery where high strength, good weldability, a
Runde Rohr aus nahtlosem Edelstahl ASTM A312 304/304L/316/316L
Seamless stainless steel round pipe is manufactured without any weld seam, created by extruding a solid billet through a mandrel to form a hollow tube. This process results in a pipe with uniform wall thickness, superior pressure resistance, and excellent structural integrity — making it the preferred choice for high-pressure, high-temperature, and corrosive environments. Unlike welded pipes, seamless pipes have no weak points along the longitudinal seam, offering reliable
Hochdruck-Duplex-Edelstahlrohr, 550 MPa Streckgrenze, Korrosionsbeständigkeit
High pressure duplex stainless steel pipe is specifically designed and manufactured to withstand extreme internal pressures while maintaining structural integrity and corrosion resistance. The unique two-phase microstructure (austenite + ferrite) provides approximately twice the yield strength of standard austenitic stainless steels such as 304 and 316, allowing for significantly thinner wall sections at equivalent pressure ratings. Our high pressure duplex pipes are produced
Rohr aus Edelstahl 310S mit niedrigem Kohlenstoffgehalt und hoher Temperatur
310S pipe is a low-carbon version of the standard 310 stainless steel grade, specifically designed for continuous high-temperature service where prolonged exposure to elevated temperatures is required. The lower carbon content (0.08% maximum compared to 0.25% for standard 310) provides improved weldability and reduces the risk of carbide precipitation during welding or sustained high-temperature operation. Like its standard 310 counterpart, 310S contains high levels of
