stainless steel welded pipe cold drawn
"
ASTM A554 Сварные трубы из нержавеющей стали, механические трубы из нержавеющей стали, протянутые холодно
ASTM A554 stainless steel welded pipe is a standard specification for welded mechanical tubing made from austenitic, ferritic, and austenitic-ferritic duplex stainless steel. Unlike pressure pipe standards (such as ASTM A312), ASTM A554 is specifically designed for mechanical applications where appearance, mechanical properties, or corrosion resistance is required, rather than internal pressure containment. ASTM A554 Stainless Steel Pipe is manufactured from flat-rolled steel
Круглые трубы из нержавеющей стали ASTM A269 высокого давления
Cold drawn stainless steel round pipe is manufactured through a multi-stage drawing process that pulls a hot-rolled or extruded tube through a die at room temperature. This cold working process produces a pipe with superior dimensional accuracy, smoother surface finish, enhanced mechanical properties, and tighter wall thickness tolerances compared to hot finished alternatives. The cold drawing process work-hardens the material, increasing tensile and yield strength while
Холоднотянутый безшовный допуск ±0,03мм трубы точности нержавеющей стали яркий поверхностный плотный
Cold drawn seamless precision pipe is manufactured from solid billet through a process of piercing and cold drawing, resulting in no weld line, uniform wall thickness, and excellent dimensional accuracy. Compared to welded tubing, it offers superior pressure resistance and structural integrity, making it ideal for high-reliability applications. Key Features: No weld seam – homogeneous structure Tight tolerance: OD/ID up to ±0.03mm Smooth surface finish: Ra ≤ 0.4μm Enhanced
Низкоуглеродные 304L 316L 317L 321L Сварные трубы из нержавеющей стали
The Low-Carbon Stainless Steel Pipe is specifically designed for welding applications where resistance to intergranular corrosion is critical. With a maximum carbon content of 0.03% (compared to 0.08% in standard grades), this pipe minimizes the formation of chromium carbides during welding, preventing sensitization and preserving corrosion resistance in the heat-affected zone (HAZ). Manufactured as seamless or welded and subsequently annealed, it offers excellent weldability
ASTM A312 304L Бесшовная труба из нержавеющей стали UNS S30403 Холодно затянутая прожектованная маринованная
304L Stainless Steel Seamless Pipe 304L (UNS S30403) is the most widely used low-carbon austenitic stainless steel globally. With its carbon content controlled below 0.03%, 304L Stainless Steel Seamless Pipe effectively prevents intergranular corrosion after welding, making it an ideal choice for chemical, petroleum, and pharmaceutical industries requiring highly reliable welded structures. Our seamless tubes strictly adhere to the ASTM A312 standard, manufactured using cold
Бесшовные круглые трубы из нержавеющей стали ASTM A312 304/304L/316/316L Список 10S до XXS
Seamless stainless steel round pipe is manufactured without any weld seam, created by extruding a solid billet through a mandrel to form a hollow tube. This process results in a pipe with uniform wall thickness, superior pressure resistance, and excellent structural integrity — making it the preferred choice for high-pressure, high-temperature, and corrosive environments. Unlike welded pipes, seamless pipes have no weak points along the longitudinal seam, offering reliable
Бесшовная труба из хромомарганцевой аустенитной нержавеющей стали UNS S20100
Chrome-manganese austenitic seamless pipe is an economical alternative to traditional chromium-nickel austenitic stainless steels such as 304 and 316. This grade achieves a stable austenitic structure by substituting a portion of expensive nickel with more cost-effective manganese and nitrogen, delivering comparable mechanical properties at a significantly lower material cost. The most common chrome-manganese austenitic grade is 201 stainless steel (UNS S20100), which
1.4307 Бесшовные трубы из нержавеющей стали EN DIN низкоуглеродного австенитного класса
1.4307 seamless stainless pipe is the European (EN/DIN) designation for a low carbon austenitic stainless steel grade, equivalent to UNS S30403 and ASTM A312 TP304L. This grade is specifically designed for applications requiring excellent corrosion resistance combined with superior weldability, particularly where post-weld heat treatment is not practical or desired. The "1.4307" designation follows the EN 10088 and EN 10216-5 standards, which govern seamless stainless steel
1.4307 Бесшовные трубы из нержавеющей стали EN DIN низкоуглеродного австенитного класса
1.4307 seamless stainless pipe is the European (EN/DIN) designation for a low carbon austenitic stainless steel grade, equivalent to UNS S30403 and ASTM A312 TP304L. This grade is specifically designed for applications requiring excellent corrosion resistance combined with superior weldability, particularly where post-weld heat treatment is not practical or desired. The "1.4307" designation follows the EN 10088 and EN 10216-5 standards, which govern seamless stainless steel
