stainless steel plate hot rolled
"
슈퍼 듀플렉스 스테인리스 스틸 판 고강성 부식 저항성
Super duplex stainless steel plate is a high-performance material that combines the advantageous properties of both austenitic and ferritic stainless steel microstructures. With a balanced duplex microstructure (approximately 50% ferrite / 50% austenite), super duplex grades offer approximately twice the yield strength of conventional austenitic stainless steels (e.g., 304, 316) while providing exceptional resistance to pitting, crevice corrosion, and stress corrosion
420 마르텐사이트계 스테인리스 장 열간압연/냉각 압연된 0.4mm - 100mm 간격
고경도 용도를 위한 420 스테인리스 판 마르텐사이트 등급
304 스테인레스 스틸 냉불 판 / 2B 완성 스테인레스 스틸 판
2B finish stainless steel sheet is the most widely used surface finish in the stainless steel industry worldwide. The "2B" designation refers to a specific mill finish achieved through cold rolling, annealing, pickling, and a final light skin pass on polished rolls.The result is a smooth, semi-reflective, matte surface — often described as a "cloudy mirror" — that offers the perfect balance of aesthetics, hygiene, and cost-effectiveness for general fabrication work.Unlike
슈퍼 듀플렉스 2507 스테인리스 스틸 판 UNS S32750 고강성 부식 저항성
Super Duplex 2507 (UNS S32750) sheets represent the highest level of duplex stainless steel technology, offering an exceptional combination of mechanical strength and corrosion resistance. This advanced material is specifically engineered for service in the most demanding environments, including high-chloride seawater, acid chloride media, and sour gas applications. The designation "Super Duplex" refers to the premium grade of duplex stainless steel with a Pitting Resistance
316 316L 스테인리스 스틸 체크 플레이트 해양 등급 안티 슬리프 스테인리스 스틸 플레이트
Marine grade stainless steel checker plate features a raised diamond pattern on the surface. This design provides excellent slip resistance and wear resistance in wet and harsh environments. Our marine grade checker plates are manufactured from Grade 316 and 316L stainless steel, which contain molybdenum for enhanced corrosion resistance against chlorides and salt water. These products are ideal for coastal and marine applications where standard stainless steels may fail.
ASTM A240 UNS S32760 스테인리스 스틸 열불판 슈퍼 듀플렉스 스테인리스 스틸 엽
UNS S32760 is a super duplex stainless steel plate that offers an exceptional combination of high strength and outstanding corrosion resistance. This grade is designed for service in aggressive environments where conventional stainless steels such as 316L or even standard duplex grades like 2205 are insufficient. The chemical composition of S32770 is carefully balanced with high levels of chromium, molybdenum, and nitrogen, along with a controlled addition of tungsten and
슈퍼 듀플렉스 2507 스테인리스 스틸 시트 ASTM A240 고강성 부식 저항성
ASTM A240 Super Duplex 2507 (UNS S32750) is a high-strength, corrosion-resistant stainless steel plate with a ferritic-austenitic microstructure. It offers approximately three times the yield strength of 316L and a PREN value of 40 or higher, providing exceptional resistance to pitting, crevice corrosion, and chloride stress corrosion cracking. Ideal for the most demanding environments, Super Duplex 2507 is widely used in offshore platforms, chemical processing, seawater
2207 스테인리스 스틸 열불판 극한 환경용 슈퍼 듀플렉스 등급
2207 스테인리스 강판, 극한 환경을 위한 슈퍼 듀플렉스 등급
UNS S32750 304 316L 공격적인 환경에 대한 듀플렉스 스테인리스 스틸 엽
UNS S32750 is a super duplex stainless steel sheet that delivers outstanding corrosion resistance combined with high mechanical strength. This grade is specifically engineered for service in extremely aggressive environments, including high-chloride seawater, acid chloride media, and sour gas applications. As a super duplex grade, UNS S32750 features a balanced microstructure of approximately 50% austenite and 50% ferrite. This dual-phase structure provides approximately
