seamless stainless steel tubing
"
고압 이중 스테인레스 강관 550 MPa 항복 강도 내식성
High pressure duplex stainless steel pipe is specifically designed and manufactured to withstand extreme internal pressures while maintaining structural integrity and corrosion resistance. The unique two-phase microstructure (austenite + ferrite) provides approximately twice the yield strength of standard austenitic stainless steels such as 304 and 316, allowing for significantly thinner wall sections at equivalent pressure ratings. Our high pressure duplex pipes are produced
가접된 아우스테니틱 스테인리스 스틸 파이프 ASTM A312 TP304 TP316
ASTM A312 stainless steel pipe is a high-performance austenitic stainless steel pipe manufactured in accordance with ASTM A312 / ASME SA312, available in both seamless and welded types. This series of pipes offers excellent corrosion resistance, high-temperature strength, and good workability. It is widely used in industries such as oil and gas, chemical processing, power generation, marine engineering, water treatment, and pressure vessels. Full-size ranges, multiple grades,
건축 산업용 구조 304 스테인레스 스틸 퀘어 튜브
304 stainless steel square tube is a hollow structural section with four equal sides. Grade 304 is the most commonly used austenitic stainless steel, offering an excellent balance of corrosion resistance, formability, and affordability. Our 304 square tubes are suitable for structural, architectural, and industrial applications. They are available in welded and seamless options to meet different project requirements. Product Specifications Parameter Details Standard ASTM A554
유압 스테인레스 스틸 정밀 튜브 부식 방지 단단한 공차 ±0.05mm
Hydraulic stainless steel precision tubing is specifically designed for high-pressure fluid power systems. Manufactured through cold drawing or cold rolling processes, this tubing offers exceptional dimensional accuracy, high burst pressure resistance, and excellent corrosion resistance. It ensures leak-free performance and long service life in demanding hydraulic environments. Key Features: High pressure rating – up to 10,000 psi (depending on size & wall thickness) Tight
큰 지름의 스테인리스 스틸 용접 파이프 304 / 316L 산 및 알칼리 저항
Large Diameter Stainless Steel Welded Pipe 304/316LLarge diameter stainless steel welded pipe is typically defined as pipe with an outer diameter exceeding 16 inches (406 mm). These pipes are manufactured by roll-forming stainless steel coils or plates into tubular shapes, followed by longitudinal welding, using processes such as SAW (Submerged Arc Welding) or LSAW (Longitudinal Submerged Arc Welding) for diameters up to 3000mm.Unlike seamless pipes, which are extruded from
고온 스테인레스 스틸 파이프 파이프 온도 교환기 응용 프로그램에 대한 산화 저항
The High-Temperature Stainless Steel Pipeline is engineered to withstand extreme thermal conditions while maintaining mechanical strength, oxidation resistance, and structural integrity. Manufactured from specialized austenitic stainless steel grades, this seamless pipeline is designed for continuous operation in elevated temperature environments up to 1150°C (2100°F), depending on the selected grade. Its excellent creep resistance and thermal fatigue properties make it the
ASTM A312 SA312 스테인리스 스틸 무선 파이프
The ASTM A312 Pipe for Chemical Processing is manufactured in accordance with the internationally recognized ASTM A312 standard, which specifies seamless, straight-seam welded, and heavily cold-worked welded austenitic stainless steel pipes. Designed specifically for high-corrosion and high-temperature service in chemical plants, this pipe offers excellent resistance to a wide range of aggressive media, including acids, alkalis, solvents, and chemical intermediates. Its
해양 등급 316 316L 강철 정면 튜브
316 stainless steel square tube is a hollow structural section with four equal sides. Grade 316 contains molybdenum, which provides superior corrosion resistance against chlorides, salt water, and harsh chemicals. Our 316 square tubes are ideal for marine, coastal, and chemical processing applications where standard 304 stainless steel may not perform adequately. Both welded and seamless options are available. Product Specifications Parameter Details Standard ASTM A554, A312,
304 316 스테인레스 스틸 사각 튜브 ASTM A554 사각 중공 섹션 스테인레스 스틸
ASTM A554 stainless steel square tube is a hollow structural section with four equal sides, manufactured in accordance with the American standard for welded stainless steel mechanical tubing. This standard covers welded tubes made from stainless steel grades specifically designed for structural and mechanical applications. Our ASTM A554 square tubes offer high strength, excellent corrosion resistance, and consistent dimensional accuracy. Product Specifications Parameter
