corrosion resistant welded steel tube
"
해양 등급 316 316L 강철 정면 튜브
316 stainless steel square tube is a hollow structural section with four equal sides. Grade 316 contains molybdenum, which provides superior corrosion resistance against chlorides, salt water, and harsh chemicals. Our 316 square tubes are ideal for marine, coastal, and chemical processing applications where standard 304 stainless steel may not perform adequately. Both welded and seamless options are available. Product Specifications Parameter Details Standard ASTM A554, A312,
2507 슈퍼 듀플렉스 스테인리스 스틸 파이프 S32760 고압 서비스
2507 super duplex stainless steel pipe is a high-performance duplex grade with a two-phase microstructure consisting of approximately 50% austenite and 50% ferrite. It belongs to the super duplex family and offers exceptional strength combined with outstanding corrosion resistance. With a Pitting Resistance Equivalent Number (PREN) exceeding 41, 2507 provides superior resistance to pitting, crevice corrosion, and stress corrosion cracking in the harshest environments,
큰 지름의 스테인리스 스틸 용접 파이프 304 / 316L 산 및 알칼리 저항
Large Diameter Stainless Steel Welded Pipe 304/316LLarge diameter stainless steel welded pipe is typically defined as pipe with an outer diameter exceeding 16 inches (406 mm). These pipes are manufactured by roll-forming stainless steel coils or plates into tubular shapes, followed by longitudinal welding, using processes such as SAW (Submerged Arc Welding) or LSAW (Longitudinal Submerged Arc Welding) for diameters up to 3000mm.Unlike seamless pipes, which are extruded from
UNS N08825 석유 및 가스용 합금 인콜로이 825 튜브
UNS N08825 is a nickel-iron-chromium alloy with significant additions of molybdenum, copper, and titanium. This austenitic nickel-iron-chromium alloy is specifically designed to provide exceptional resistance to both reducing and oxidizing acids, as well as stress-corrosion cracking and pitting in chloride-containing environments.What sets UNS N08825 apart is its stabilized structure – the addition of titanium prevents intergranular corrosion after welding, making it suitable
높은 일 강하게 하는 비율을 가진 201 스테인리스 이음새가 없는 관 ASTM A554 SS 이음새가 없는 관
201 Stainless Steel Seamless Pipe ASTM A554 SS Tube with Mill Test Certificate The 201 Stainless Steel Seamless Pipe is an austenitic chromium-nickel-manganese alloy that provides an economical solution for moderately corrosive environments. Compared to standard carbon steel, it delivers superior oxidation resistance and significantly higher mechanical strength. At ZhongCheng, we manufacture these pipes in strict accordance with ASTM A554 / A312 standards, ensuring precise
UNS N06600 클로라이드 스트레스 경화 균열 저항성 니켈 합금 튜브
UNS N06600 High Temperature Nickel Alloy Tube - Heat Resistant Nickel Chromium Alloy UNS N06600 (Inconel 600) is a nickel-chromium alloy specifically designed for high-temperature and corrosion-resistant applications. With a nominal composition of 72% Ni + 14-17% Cr, this alloy offers excellent oxidation resistance up to 1093°C (2000°F), good strength at elevated temperatures, and outstanding resistance to chloride-ion stress-corrosion cracking. The high-temperature nickel
고강성 인코넬 625 UNS N06625 합금
UNS N06625 is a nickel-chromium-molybdenum alloy with outstanding corrosion resistance and high strength over a broad temperature range from cryogenic to 980°C (1800°F). The addition of niobium (columbium) and tantalum provides exceptional resistance to pitting, crevice corrosion, and chloride ion stress-corrosion cracking. Unlike many high-temperature alloys, UNS N06625 does not rely on precipitation hardening for strength. Instead, it derives its high tensile and creep
구조상 장식적인 부식성 환경을 위한 낮은 니켈 스테인리스 이음새가 없는 관
Low-nickel stainless steel seamless tube is an economical alternative to traditional austenitic stainless steels such as 304 and 316. By reducing nickel content and increasing manganese and nitrogen, this grade achieves a balanced austenitic structure at a significantly lower material cost, making it an attractive choice for general industrial applications where extreme corrosion resistance is not the primary requirement. The most common low-nickel austenitic grade is 201
열간압연 SS SMLS 관 뜨거운 완성되는 이음새가 없는 건축 스테인리스 둥근 관
Hot Rolled Stainless Steel SMLS Pipe is manufactured by heating a solid stainless steel billet to approximately 1200°C (2200°F) and then rolling it through a series of mills to form a hollow tube. This high-temperature forming process allows for the production of large diameter, thick wall pipes that cannot be efficiently manufactured through cold drawing methods. Hot rolled seamless pipes are the backbone of heavy industrial piping systems, offering excellent mechanical
