corrosion resistant stainless steel tube
"
0.3mm - 2.0mm 얇은 벽 스테인리스 스틸 둥근 파이프 닦은 마무리
Thin Wall Stainless Steel Round Tubing is manufactured from high-quality austenitic stainless steel through precision roll forming and advanced TIG or laser welding processes. With wall thicknesses ranging from 0.3mm to 2.0mm, this tubing offers significant weight reduction, material efficiency, and cost savings while maintaining excellent corrosion resistance and structural integrity. Its lightweight characteristics make it ideal for applications where weight is a critical
고강성 스테인리스 스틸 정밀 파이프 ASTM A789
ASTM A789 / A789M covers the requirements for seamless and welded duplex stainless steel tubes for general corrosion-resistant service, with particular emphasis on resistance to stress corrosion cracking. This product combines the excellent toughness of austenitic stainless steel with the high strength of ferritic stainless steel, while offering superior resistance to chloride-induced pitting and crevice corrosion. This product covers common grades including UNS S31803,
ASTM A789 2205 듀플렉스 스테인레스 스틸 정밀 파이프
ASTM A789 2205 유압 공정 라인에 대한 부식 방지 이중 이음매 없는 튜브
고 정밀성 304 스테인리스 스틸 무선 파이프 콜드 롤러 코로시온 저항성
304 Stainless Steel Seamless Pipe The 304 stainless steel seamless pipe is a globally recognized standard grade in the stainless steel family. With a chemical composition of 18% chromium and 8% nickel, it offers excellent corrosion resistance, high toughness, and outstanding formability. Manufactured using precision seamless cold-rolling technology, this pipe delivers a superior surface finish, tight dimensional tolerances, and consistent mechanical properties — making it the
구조적 듀플렉스 스테인리스 스틸 파이프 UNS S32101 하부 니켈 고강도 파이프
UNS S32101 is a lean duplex stainless steel grade that offers a balanced combination of good strength, excellent corrosion resistance, and cost-effectiveness. It belongs to the lean duplex family (also known as LDX 2101®), containing lower nickel and molybdenum than standard duplex grades like 2205, making it a more economical alternative without significantly compromising performance. Manufactured in accordance with ASTM A789 and ASTM A790, UNS S32101 tubes are available in
ASTM A789 듀플렉스 스테인레스 스틸 정밀 파이프
ASTM A789 이중 튜브 열교환기 및 계측 라인용 이중 튜브
구조상 장식적인 부식성 환경을 위한 낮은 니켈 스테인리스 이음새가 없는 관
Low-nickel stainless steel seamless tube is an economical alternative to traditional austenitic stainless steels such as 304 and 316. By reducing nickel content and increasing manganese and nitrogen, this grade achieves a balanced austenitic structure at a significantly lower material cost, making it an attractive choice for general industrial applications where extreme corrosion resistance is not the primary requirement. The most common low-nickel austenitic grade is 201
스테인레스 스틸 듀플렉스 파이프 2205 2507 냉면 무선 파이프
Seamless duplex stainless steel tube is manufactured without any weld seam, produced by extruding a solid billet of duplex stainless steel into a hollow tube through a piercing and rolling process. The absence of a weld seam provides superior strength, uniform wall thickness, and excellent performance under high pressure, high temperature, and corrosive conditions. Our seamless duplex tubes offer the unique combination of high strength (approximately twice that of austenitic
316 316L 스테인리스 스틸 톱리스 파이프 오스텐이틱 니켈 크롬 몰리브덴 합금 스틸
316/316L Seamless Pipe - ASTM A312 TP316L Marine-grade Stainless Steel Pipe 316/316L stainless steel seamless pipe is an austenitic chromium-nickel-molybdenum alloy pipe known for its superior corrosion resistance, especially against chlorides and acidic environments. 316L is the low-carbon version of 316, offering better weldability and resistance to intergranular corrosion after welding. Both grades are widely used in marine, chemical, and pharmaceutical applications. Key
