316l brushed stainless steel sheet
"
420 스테인리스 스틸 냉장 롤 엽 정밀 차원 밝은 표면 마무리
420 cold-rolled stainless steel sheet is a high-carbon martensitic stainless steel produced through precision cold rolling processes. The cold rolling operation imparts superior surface finish, tight dimensional tolerances, and enhanced mechanical properties compared to hot-rolled equivalents. This grade offers high hardness (after heat treatment), good wear resistance, and moderate corrosion resistance. It is widely used in applications requiring a combination of sharp
로비 인테리어를 위해 패턴화되는 304 316 스테인레스 스틸 돋을새김 시트
Embossed stainless steel sheet for architecture is specifically designed for use in building interiors, exteriors, and decorative architectural applications. The raised patterns create visual texture, enhance aesthetic appeal, and provide practical benefits such as scratch concealment and reduced maintenance visibility.Our architectural embossed sheets are manufactured from premium stainless steel grades and are available in a wide variety of patterns, including leather grain
304 스테인레스 스틸 냉불 판 / 2B 완성 스테인레스 스틸 판
2B finish stainless steel sheet is the most widely used surface finish in the stainless steel industry worldwide. The "2B" designation refers to a specific mill finish achieved through cold rolling, annealing, pickling, and a final light skin pass on polished rolls.The result is a smooth, semi-reflective, matte surface — often described as a "cloudy mirror" — that offers the perfect balance of aesthetics, hygiene, and cost-effectiveness for general fabrication work.Unlike
고강도 듀플렉스 스테인리스 스틸 튜브
Duplex stainless steel sheet is a family of stainless steel grades with a mixed austenitic-ferritic microstructure (approximately 50% austenite / 50% ferrite). This unique structure delivers approximately twice the yield strength of standard austenitic grades like 304 or 316, combined with excellent resistance to chloride stress corrosion cracking (SCC), pitting, and crevice corrosion. Duplex stainless steel sheets are the material of choice for demanding applications in
해양 등급 316 스테인레스 스틸 직사각형 중공 단면 용접 ASTM A554
Marine grade rectangular hollow section (RHS) refers to 316 stainless steel rectangular tubing specifically designed for applications in coastal, offshore, and marine environments where standard 304 stainless steel would be susceptible to pitting and corrosion from chloride exposure. The addition of 2-3% molybdenum to the 316 grade provides significantly enhanced resistance to pitting, crevice corrosion, and stress corrosion cracking in seawater, salt spray, and chloride-rich
광택 처리된 304 스테인레스 스틸 체크 무늬 플레이트 No.8 미러 마감 SS 체크 무늬 시트
Polished stainless steel checker plate features a raised diamond pattern on a reflective, lustrous surface. This combination provides excellent slip resistance along with an attractive, decorative appearance.Our polished checker plates are manufactured from high-grade stainless steel and undergo a finishing process that creates a smooth, bright surface. They offer corrosion resistance, durability, and aesthetic appeal for both functional and decorative applications.Product
정밀 301 304 316 430 냉간 압연 스테인레스 스틸 스트립 2B BA No.4 마감
Precision cold rolled stainless steel strip is a narrow, thin-gauge stainless steel product manufactured to significantly tighter thickness and width tolerances than standard cold-rolled sheet. Unlike standard sheet (typically 1000mm or 1219mm wide), precision strip is produced in narrow widths — usually less than 600mm — and thin gauges from 0.05mm up to 3.0mm. The key differentiator is the tolerance : the precision strip holds thickness variations to as low as ±0.005mm,
201 스테인레스 스틸 쿼커 엽 다이아몬드 판 안티 슬리드 경식 저항
The 201 Stainless Steel Checkered Plate (also known as diamond plate, tread plate, or chequered plate) features a raised diamond pattern on one side and a smooth reverse side. This design provides excellent anti-slip properties while maintaining the durability and corrosion resistance of stainless steel. Grade 201 is an austenitic chromium-manganese stainless steel developed as a cost-effective alternative to 304 grade. It offers good mechanical properties and workability,
용접 된 304 스테인리스 스틸 원형 파이프 ASTM A312 수레 레일링에 대한 거울 마무리
Welded stainless steel round pipe is manufactured by forming a flat stainless steel strip or sheet into a cylindrical shape and welding the longitudinal seam. This process creates a cost-effective, dimensionally consistent pipe suitable for a wide range of industrial, commercial, and architectural applications. While seamless pipes are preferred for extremely high-pressure environments, welded pipes offer exceptional value for general-purpose applications where pressure
