304 stainless steel welded pipe
"
316 스테인리스 스틸 직사각형 튜브 ASTM A554 직사각형 홀 섹션
316 stainless steel rectangular tubing is the premium choice for applications requiring superior corrosion resistance, especially in chloride-rich environments such as coastal areas, marine settings, and chemical processing facilities. The addition of molybdenum (2-3%) gives 316 significantly better resistance to pitting, crevice corrosion, and stress corrosion cracking compared to 304 stainless steel. This rectangular hollow section (RHS) is manufactured to ASTM A554
구조상 장식적인 부식성 환경을 위한 낮은 니켈 스테인리스 이음새가 없는 관
Low-nickel stainless steel seamless tube is an economical alternative to traditional austenitic stainless steels such as 304 and 316. By reducing nickel content and increasing manganese and nitrogen, this grade achieves a balanced austenitic structure at a significantly lower material cost, making it an attractive choice for general industrial applications where extreme corrosion resistance is not the primary requirement. The most common low-nickel austenitic grade is 201
ASTM A554 304 316 스테인리스 스틸 직사각형 튜브 가루
ASTM A554 stainless steel rectangular tube is the standard specification for welded mechanical tubing made from austenitic stainless steels. Unlike pressure-rated pipes (ASTM A312), ASTM A554 tubes are designed for mechanical and structural applications where aesthetics, dimensional accuracy, and corrosion resistance are key requirements. These rectangular hollow sections (RHS) are manufactured from stainless steel strip, roll-formed into shape, and longitudinally welded. The
UNS S31803 꿰매지 않는 파이프 ASTM A789 4" 스케줄 40 스테인리스 스틸 파이프
UNS S31803 duplex stainless steel pipe is a widely used duplex grade that offers a balanced mix of good strength, excellent corrosion resistance, and cost-effectiveness. It is the original standard duplex stainless steel, commonly specified in ASTM A790 and ASTM A789 for both seamless and welded pipe applications.With a dual-phase microstructure (austenite + ferrite), UNS S31803 provides approximately twice the yield strength of 304 or 316L austenitic stainless steels, while
산업 용접 스테인리스 스틸 파이프 스케줄 5S ~ 40S 수정적 테스트
The Industrial Grade Welded Stainless Steel Pipe is manufactured from high-quality austenitic stainless steel coils, formed into a cylindrical shape, and longitudinally welded using advanced automatic welding processes. Designed to meet the demanding requirements of industrial applications, this pipe offers reliable corrosion resistance, consistent mechanical properties, and cost-effective performance. It is an excellent alternative to seamless pipe for moderate pressure and
스테인리스 스틸 ERW 용접 파이프 목록 5S에서 40S 물 공정 응용 프로그램
The Stainless Steel ERW (Electric Resistance Welded) Pipe is manufactured by cold-forming stainless steel coils into a cylindrical shape and welding the longitudinal seam using high-frequency electric resistance welding technology. This process produces a pipe with a narrow, uniform weld seam that is virtually indistinguishable from the base metal after proper heat treatment. ERW pipes offer an excellent balance of corrosion resistance, dimensional accuracy, and cost
스톱리스 웰드 2205 듀플렉스 스테인리스 스틸 튜브 ASTM A790
2205 duplex stainless steel pipe offers a balanced combination of high strength and excellent corrosion resistance, making it the preferred choice for industries such as oil & gas, chemical processing, marine engineering, and desalination plants. With a duplex microstructure (approximately 50% austenite + 50% ferrite), 2205 provides nearly twice the yield strength of common austenitic stainless steels like 304 or 316L, while maintaining good weldability and fabricability. Key
ASTM A790 용접된 듀플렉스 스테인리스 스틸 파이프 2205 2507 2304 등급
Welded duplex stainless steel pipe is manufactured by forming a flat strip of duplex stainless steel into a cylindrical shape and welding the longitudinal seam. This process produces a pipe with excellent dimensional accuracy, consistent wall thickness, and a cost-effective solution for corrosive service applications. Our welded duplex pipes are produced using advanced welding techniques including ERW (Electric Resistance Welding), EFW (Electric Fusion Welding), and DSAW
구조적 듀플렉스 스테인리스 스틸 파이프 UNS S32101 하부 니켈 고강도 파이프
UNS S32101 is a lean duplex stainless steel grade that offers a balanced combination of good strength, excellent corrosion resistance, and cost-effectiveness. It belongs to the lean duplex family (also known as LDX 2101®), containing lower nickel and molybdenum than standard duplex grades like 2205, making it a more economical alternative without significantly compromising performance. Manufactured in accordance with ASTM A789 and ASTM A790, UNS S32101 tubes are available in
