304 colored stainless steel sheet
"
420 Plaque laminée à froid en acier inoxydable Dimension de précision Finition de surface brillante
420 cold-rolled stainless steel sheet is a high-carbon martensitic stainless steel produced through precision cold rolling processes. The cold rolling operation imparts superior surface finish, tight dimensional tolerances, and enhanced mechanical properties compared to hot-rolled equivalents. This grade offers high hardness (after heat treatment), good wear resistance, and moderate corrosion resistance. It is widely used in applications requiring a combination of sharp
Résistance à la corrosion des tubes en acier inoxydable duplex à haute résistance
Duplex stainless steel sheet is a family of stainless steel grades with a mixed austenitic-ferritic microstructure (approximately 50% austenite / 50% ferrite). This unique structure delivers approximately twice the yield strength of standard austenitic grades like 304 or 316, combined with excellent resistance to chloride stress corrosion cracking (SCC), pitting, and crevice corrosion. Duplex stainless steel sheets are the material of choice for demanding applications in
UNS S30403 Tubes sans soudure en acier inoxydable TP304L soudables sans traitement thermique post-soudure
UNS S30403 seamless pipe is a low carbon version of the standard 304 austenitic stainless steel, designed for applications requiring enhanced resistance to intergranular corrosion after welding or elevated temperature exposure. The "UNS S30403" designation corresponds to the Unified Numbering System for metals, identifying a composition of 18-20% chromium and 8-12% nickel, with a maximum carbon content of 0.030%. The low carbon content is the defining characteristic of UNS
Précision 301 304 316 430 bande en acier inoxydable laminée à froid 2B BA n°4 Finition
Precision cold rolled stainless steel strip is a narrow, thin-gauge stainless steel product manufactured to significantly tighter thickness and width tolerances than standard cold-rolled sheet. Unlike standard sheet (typically 1000mm or 1219mm wide), precision strip is produced in narrow widths — usually less than 600mm — and thin gauges from 0.05mm up to 3.0mm. The key differentiator is the tolerance : the precision strip holds thickness variations to as low as ±0.005mm,
Glissement à carreaux de plat de diamant de feuille de l'acier inoxydable 201 anticorrosion
The 201 Stainless Steel Checkered Plate (also known as diamond plate, tread plate, or chequered plate) features a raised diamond pattern on one side and a smooth reverse side. This design provides excellent anti-slip properties while maintaining the durability and corrosion resistance of stainless steel. Grade 201 is an austenitic chromium-manganese stainless steel developed as a cost-effective alternative to 304 grade. It offers good mechanical properties and workability,
Super duplex 2507 tôle en acier inoxydable UNS S32750 résistant à la corrosion à haute résistance
Super Duplex 2507 (UNS S32750) sheets represent the highest level of duplex stainless steel technology, offering an exceptional combination of mechanical strength and corrosion resistance. This advanced material is specifically engineered for service in the most demanding environments, including high-chloride seawater, acid chloride media, and sour gas applications. The designation "Super Duplex" refers to the premium grade of duplex stainless steel with a Pitting Resistance
Plaque à carreaux en acier inoxydable 304 poli, finition miroir No.8, feuille à carreaux SS
Polished stainless steel checker plate features a raised diamond pattern on a reflective, lustrous surface. This combination provides excellent slip resistance along with an attractive, decorative appearance.Our polished checker plates are manufactured from high-grade stainless steel and undergo a finishing process that creates a smooth, bright surface. They offer corrosion resistance, durability, and aesthetic appeal for both functional and decorative applications.Product
Tuyau anticorrosion de courbure en U de tube d'échangeur de chaleur d'acier inoxydable d'ASTM A213
U-bend stainless steel heat exchanger tubes are seamless or welded tubes precision-formed into a U-shape, designed specifically for shell and tube heat exchangers. This U-configuration allows the tube bundle to expand and contract freely under thermal stress while eliminating the need for a second tube sheet, making the entire heat exchanger more compact, cost-effective, and easier to maintain. Manufactured from high-quality austenitic stainless steel grades such as 304, 304L
Carte laminée à froid en acier inoxydable martensitique 420 haute dureté résistante à l'usure
Bonne polissabilité résistante à l'usure de dureté élevée de feuille de 420 solides solubles
