cold rolled stainless steel sheet
"
High Strength Duplex Stainless Steel Tube Corrosion Resistance
Duplex stainless steel sheet is a family of stainless steel grades with a mixed austenitic-ferritic microstructure (approximately 50% austenite / 50% ferrite). This unique structure delivers approximately twice the yield strength of standard austenitic grades like 304 or 316, combined with excellent resistance to chloride stress corrosion cracking (SCC), pitting, and crevice corrosion. Duplex stainless steel sheets are the material of choice for demanding applications in
Martensitic 420 Stainless Steel Cold Rolled Sheet High Hardness Wear Resistant
420 stainless steel plate is a martensitic stainless steel with higher carbon content than grade 410, designed for applications requiring excellent hardness, wear resistance, and moderate corrosion resistance. It can be heat-treated to achieve a hardness of up to 50 HRC, making it the hardest among the 12% chromium grades. Grade 420 stainless steel is widely used in cutlery, surgical instruments, pump shafts, valve components, bearings, and plastic molding tools. Its
Super Duplex 2507 Stainless Steel Plate Sheet UNS S32750 High Strength Corrosion Resistant
Super Duplex 2507 (UNS S32750) sheets represent the highest level of duplex stainless steel technology, offering an exceptional combination of mechanical strength and corrosion resistance. This advanced material is specifically engineered for service in the most demanding environments, including high-chloride seawater, acid chloride media, and sour gas applications. The designation "Super Duplex" refers to the premium grade of duplex stainless steel with a Pitting Resistance
Welded Austenitic Stainless Steel Pipe ASTM A312 TP304 TP316
ASTM A312 stainless steel pipe is a high-performance austenitic stainless steel pipe manufactured in accordance with ASTM A312 / ASME SA312, available in both seamless and welded types. This series of pipes offers excellent corrosion resistance, high-temperature strength, and good workability. It is widely used in industries such as oil and gas, chemical processing, power generation, marine engineering, water treatment, and pressure vessels. Full-size ranges, multiple grades,
Low Nickel Stainless Steel Seamless Tube For Structural Decorative Corrosive Environments
Low-nickel stainless steel seamless tube is an economical alternative to traditional austenitic stainless steels such as 304 and 316. By reducing nickel content and increasing manganese and nitrogen, this grade achieves a balanced austenitic structure at a significantly lower material cost, making it an attractive choice for general industrial applications where extreme corrosion resistance is not the primary requirement. The most common low-nickel austenitic grade is 201
1.4307 Stainless Steel Seamless Pipe EN DIN Low Carbon Austenitic Grade
1.4307 seamless stainless pipe is the European (EN/DIN) designation for a low carbon austenitic stainless steel grade, equivalent to UNS S30403 and ASTM A312 TP304L. This grade is specifically designed for applications requiring excellent corrosion resistance combined with superior weldability, particularly where post-weld heat treatment is not practical or desired. The "1.4307" designation follows the EN 10088 and EN 10216-5 standards, which govern seamless stainless steel
1.4307 Stainless Steel Seamless Pipe EN DIN Low Carbon Austenitic Grade
1.4307 seamless stainless pipe is the European (EN/DIN) designation for a low carbon austenitic stainless steel grade, equivalent to UNS S30403 and ASTM A312 TP304L. This grade is specifically designed for applications requiring excellent corrosion resistance combined with superior weldability, particularly where post-weld heat treatment is not practical or desired. The "1.4307" designation follows the EN 10088 and EN 10216-5 standards, which govern seamless stainless steel
High Temperature Seamless Stainless Steel 310 Pipe For Furnace Heat Treat Applications
SS 310 seamless pipe is a premium austenitic stainless steel product designed for extreme high-temperature service where weld seams cannot be tolerated. The seamless manufacturing process ensures uniform wall thickness, consistent mechanical properties, and a complete absence of a longitudinal weld seam, making it the preferred choice for high-pressure and high-temperature piping systems in demanding industrial environments. The 310 grade contains high levels of chromium (24
High Temperature Stainless Steel SS 310 Seamless Pipe For Extreme Heat Service
SS 310 pipe is an austenitic stainless steel grade specifically designed for high-temperature applications. With excellent oxidation resistance and good strength at elevated temperatures, this grade is the preferred choice for furnace parts, heat treatment equipment, and high-temperature industrial piping systems. The 310 grade contains high levels of chromium (24-26%) and nickel (19-22%), which provide exceptional resistance to scaling at temperatures up to 1100C (2012F)
