carbon seamless steel pipe
"
Super Duplex 2507 Pipe Stainless Steel Tube For Extreme Corrosive Environments
Duplex 2507 pipe is a super duplex stainless steel designed for applications requiring exceptional strength and outstanding corrosion resistance. With a duplex microstructure (approximately 50% austenite / 50% ferrite), it offers nearly twice the yield strength of common austenitic stainless steels like 316L or 317L. This grade is the material of choice for offshore platforms, chemical processing, desalination plants, and oil & gas exploration, where chloride pitting, crevice
Stainless Steel Duplex Pipe 2205 2507 Cold Drawn Seamless Tubing
Seamless duplex stainless steel tube is manufactured without any weld seam, produced by extruding a solid billet of duplex stainless steel into a hollow tube through a piercing and rolling process. The absence of a weld seam provides superior strength, uniform wall thickness, and excellent performance under high pressure, high temperature, and corrosive conditions. Our seamless duplex tubes offer the unique combination of high strength (approximately twice that of austenitic
ASTM A789 UNS S32750 Duplex Stainless Steel Tube For Offshore Subsea
ASTM A789 UNS S32750 super duplex stainless steel tube is a premium-grade product designed for the most demanding industrial applications. With a higher chromium, molybdenum, and nitrogen content than standard duplex grades (e.g., 2205/S31803), UNS S32750 offers superior strength and exceptional corrosion resistance, particularly in aggressive chloride-containing environments. This tube is manufactured in accordance with ASTM A789, covering both seamless and welded ferritic
Corrosion Resistant Inconel 600 Seamless Pipe High Temperature Nickel Chromium Alloy
Inconel 600 (UNS N06600, W.Nr. 2.4816, Alloy 600) is a standard engineering material that has proven itself across industries for over half a century. This nickel-chromium alloy delivers an exceptional combination of high temperature strength (up to 2000F / 1093C), excellent corrosion resistance, and superior workability. Unlike many high-performance alloys, Inconel 600 is not precipitation hardenable it is strengthened only by cold work. This characteristic, combined
ASTM A249 Welded Austenitic Stainless Steel Tube For Heat Exchanger Boiler Service
ASTM A249 / A249M is a standard specification issued by ASTM International for welded austenitic stainless steel tubes used in boilers, superheaters, heat exchangers, condensers, and hydraulic systems. These tubes are manufactured using GTAW or ERW processes and are supplied in the solution annealed condition to ensure corrosion resistance and high-temperature strength. This product covers common grades such as TP304, TP304L, and TP304H, making it particularly suitable for
Low Nickel Stainless Steel Seamless Tube For Structural Decorative Corrosive Environments
Low-nickel stainless steel seamless tube is an economical alternative to traditional austenitic stainless steels such as 304 and 316. By reducing nickel content and increasing manganese and nitrogen, this grade achieves a balanced austenitic structure at a significantly lower material cost, making it an attractive choice for general industrial applications where extreme corrosion resistance is not the primary requirement. The most common low-nickel austenitic grade is 201
ASTM B407 UNS N08810 Incoloy 800H Pipe High Temperature Service Alloy
UNS N08810 is a nickel-iron-chromium alloy specifically designed for high-temperature service requiring good creep and rupture strength above 600C (1112F). It is a controlled chemistry version of UNS N08800 (Alloy 800), with tighter limits on carbon (0.05-0.10%) and a coarse grain size requirement (ASTM 5 or coarser) to optimize high-temperature properties. The alloy maintains an austenitic structure and offers excellent oxidation and carburization resistance, as well as
ASTM A249 ASME SA249 Welded Stainless Steel Tube For Heat Exchangers
Welded stainless steel tube is manufactured by forming stainless steel strip into a tube shape and longitudinally welding the seam using automatic GTAW (Tungsten Inert Gas) or laser welding processes. After welding, the tube undergoes solution annealing and NDT testing to ensure weld integrity and consistent corrosion resistance. Welded tubes offer a cost-effective alternative to seamless tubes for applications not requiring the extreme pressure ratings or critical service
ASTM A500 Stainless Steel Square Pipe Grade B Structural Square Hollow Section
What Is ASTM A500? ASTM A500 is the American standard for cold-formed welded and seamless carbon steel structural tubing in round, square, and rectangular shapes. It is the go-to specification for structural applications where strength, weldability, and economy are required. Square steel tubes under ASTM A500 are produced as cold-formed welded tubes, then heat-treated to remove internal stresses and improve mechanical properties. The standard covers four grades: A, B, C, and
